Big problem of water infiltration

[hooray]

Hi

i have a superjet99, when i ride it,after like 5 mins, the hull is full of water, the bilge pump is even not able to provide. My cooling line are ok, my hull is not leaking, every thing seems to be normal. Have you any idea where the water can come?,

thx for the help!

»frank

 

[Mike W]

Check the bond line for leaks.

 

[hooray]

im sorry but what is the bond line? where the hood is closing?

Is it possible the water is coming from the shaft seal?

 

[pimpchevy07]

i had a ski that leaked in from the midshaft, it filled up pretty fast

 

[demolition_x]

stick the nose against something like a dock and take the hood off and run it against the dock. watch inside for h20

 

[Dustin Mustangs]

That would be good for a cooling leak... To find a hull leak you can just fill it up with water on the trailer and look to see where it is coming out.

 

[hooray]

i already fill it up to see if there would have a leak, no leaks. I reinforced the hull with carbone fiber last winter. i refoamed it too.

 

[stanton]

Hi
My cooling line are ok
»frank

you 100% sure?

 

[surferdude345]

Easy way to tell - Hook it up to a hose if it doesn't leak its most likely the mid shaft if it leaks while on hose its ur cooling

 

[Mike W]

im sorry but what is the bond line? where the hood is closing?

Is it possible the water is coming from the shaft seal?

Its where the factory bonds the top and bottom deck together.

 

[INDebtSJ]

Make sure the hose clamps are tight at the exhaust hose and waterbox.