- Location
- Wilmington, NC
Got a 2014 Superjet, just rode in salt water. Went to use the backflush kit I made for a blaster but it will not go into the pisser, anyone know what size I need to use?
Thanks,
Thanks,
Super Jet Backflush?
- Thread starter Heelz23
- Start date
Usually you Have to put an aftermarket pisser on it
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
Stock pisser is only like 3mm. Does it not have a stock flush kit mounted to the back of the pipe/manifold?
- Location
- Wilmington, NC
No, does not have a stock flush kit. I do have a ada pisser I can put on it however. Back-flushing is better than installing an aftermarket flush kit right?
550headache
tobacco grower
- Location
- tobacco valley
there is a brass plug on the back of the exhaust manifold you take out and can screw in a brass nipple and make your own flush kit.
Backflush with a salt terminator nozzle works well. I made one out of fittings at home depot. 7/8 garden hose to 3/8 tubing. A length of 3/8 fuel line then for the tip I used a piece of 3/16 brake line with 1/4 tubing over it so that it would fit into the 3/8 line better.
- Location
- Wilmington, NC
Salt terminator nozzle????
https://www.blowsion.com/salt-terminator-quart-kit-with-mixer-crc-sx32mm
I mean the mixer shown here
I mean the mixer shown here