b pipe

cambo au

TRYING TO LEARN
Location
AUSTRALIA
on the weekend i started tuning my ski witch now has a b pipe on it after reading the foroms on here i decided to run my cooling like this
single cool into the bottom of manifold out the front of the head to a pisser with a restricter out the back of the head down to the bottom of the header pipe out the top to the stinger y ed out another pisser with a 2-3 mm restrictor to the stinger i cracked the top screw 3/4 of a turn and ran it .
when i checked the pipe it was sizling all the way to the end of the chamber so i kept backing it out until i got it to sizzel 2 to 3 inches of the rubber and i am now out 6 turns on the top screw duz this sound right or did i miss something i thought most people said they run ruffly 1/2 to 3/4 of a turn?


this is my set up
62t cases 61x cylinder the transfers matched to the sleeves and the exhaust cleaned up
carbon reads
dual 38s
girdled head running around 160 psi
b pipe

when i started tunning it has stock low jet 135 jet 29 psi pop off
i am 1 1/4 out on the highs and i stopped at 2/14 turns on the lows and it still felt like a lean hesitation down low what settings are you guys running with 38s
thanks campbell
 

waxhead

wannabe backflipper
Location
gold coast
not enough water pressure in the pipe due to the extra bypass

I only ever have the bottom screw open 3/4

Hang on i will call you
 
Top Bottom