b-pipe jetting??

[ketsair]

anyone have any clue about jetting & pop off for a stock 61x with a b-pipe mod?

 

[SJet]

What carbs are you running?

 

[romack991]

bottom of page 3

http://www.factorypipe.com/Technical/Instructions/701sj01.pdf

 

[SJet]

Ahh, yeah what he said!

:smile:

 

[ketsair]

unfortunately, my computer won't open up the pdf file, slow dial up and my computer has issues with doin anything that takes thought....:banghead: :banghead:

it has the stock single 44 carb

 

[romack991]

Cut and pasted

Main Jet : 145
Pilot Jet : 120
High speed screw : 1½ turns out from closed
Low speed screw : 2 ½ turns out from closed
Needle & Seat : Stock
Spring : 95 gram
Comments : Mod applications may require different jetting


Recommendation as just about right on back when I had my motor stock.

 

[ketsair]

thanks romack, one day i might spend some $$ on a nice computer, and one of these years they're bound to offer something other than overloaded dialup out here!!!

Cut and pasted

Main Jet : 145
Pilot Jet : 120
High speed screw : 1½ turns out from closed
Low speed screw : 2 ½ turns out from closed
Needle & Seat : Stock
Spring : 95 gram
Comments : Mod applications may require different jetting


Recommendation as just about right on back when I had my motor stock.