b-pipe cooling

[km550123]

i know there is a million threads on this topic but im not smart can someone try to explain how the cooling lines go?
i have a stock head (one outlet)
and a b- pipe im looking for single cooling..

 

[puppy]

pic

 

[puppy]

b pipe ada 35 domes 75 -135 jets one out how I ran mine

 

[LBE]

In the bottom out the top.

I suggest getting smarter.

 

[weston]

i found this here on the x i have not compared this to my notes.
im not sure about the dirrection the person has listed hints the doodles on the picture good luck

 

[SUPERTUNE]

You don't need anything too fancy with cooling line routing...just stick to the basics like Factory Pipe instructions.
The IN cooling at the bottom of exhaust manifold, OUT at the head to the top of headpipe, OUT from the bottom of headpipe to the stinger inlet, use a 'T' in this line and go to a bypass out the hull.
If you have a Jetworks flow control valve put it inline after the 'T' and before the stinger inlet.

 

[lostndrkness01]

is it ok to run a t fitting at the bottom of the exhaust manifold for single cooling? this is on a 07 sj...

 

[lostndrkness01]

need help!!! thanks