- Location
- Corona, CA
Selling a brand new set of A2 stainless steel headpipe bolts for a Factory Pipe B-pipe. If you've looked into this upgrade you know that these M10x1.25mm pitch bolts are not easy to find.
Comes with the flat washers and lock washers. I've got two sets, one that has 45mm length bolts and one that has 50mm length bolts.
The stock Yamaha B-pipe bolts are 40mm. The flat washers (that do not come with from Factory Pipe) add 2mm of thickness and there is still more thread left in the manifold, so I decided to get the 45mm length (essentially +3mm of thread engagement then from the bolts that Factory Pipe gives you).
$25 shipped per set.
50mm length sold. 45mm length still available.
Comes with the flat washers and lock washers. I've got two sets, one that has 45mm length bolts and one that has 50mm length bolts.
The stock Yamaha B-pipe bolts are 40mm. The flat washers (that do not come with from Factory Pipe) add 2mm of thickness and there is still more thread left in the manifold, so I decided to get the 45mm length (essentially +3mm of thread engagement then from the bolts that Factory Pipe gives you).
$25 shipped per set.
50mm length sold. 45mm length still available.
Attachments
Last edited:
