Anyone make there own trim setup cheaply?

[Kwit]

Ive sucessfully made a trim setup for my x2. Making this setup for the x2 was conciderably easier due to the fact that it had a stock trim setup already in place and only needed minor modification to make it actuated by a handlebar mounted lever. Mainly talking about homemade setups for Superjets here. Ive seen posts after searching and it seems that the radier trim system can be modifyd to work on a sj. Furthermore it seems by welding and some fabercation of the stock sj parts a trim system can also be fabed up. There were pictures in a "C.A.T.S trim" thread but nothing in detail. Anyone ever tackle a trim system for under 100 bucks? lets see some of your fab work! I will be conjuring up a trim system myself and need some direction! lets see whatcha got:biggthumpup:

 

[demolition_x]

you need the trim ring and turn nozzle from a wave raider. then you have to get the stock nozzle beefed up to accept the mounting for the trim ring. then you need a cable from terry cable.

 

[TKM]

wb 760??

Can you use a trim ring and turn nozzle from a WB 760/waveblaster 2??

 

[SuperJETT]

reduction/steering nozzle setup from Raider $75
cable from Terrycable $30
free lever from local bike shop $0
trim cable tube already installed in ski when I got it $0

20+ degrees of trim for $105+

 

[romack991]

My trim cost me a $30 cable from terry cable. Free bike lever. Used the stock SJ nozzle.

Total = 30 dollars

 

[FreestyleFreak]

Is their any way that i could get that setup to work on a kawasaki 650 sx it sounds pretty simple.

 

[Kwit]

^^^^easiest thing for you bro is to just get an x2 set up. It will bolt right up to ur pump and everything

 

[Crab]

^^^^easiest thing for you bro is to just get an x2 set up. It will bolt right up to ur pump and everything

What he said.:haha:

 

[Project Ski]

Hey crab, did you do any additional mods to your trim to get the stock nozzle to trim that high?

 

[Crab]

Tweaked all the adjusters including the ones inside the engine bay. Then you have to grind a bit on the trim rings, and cut the back of the boat off to get the height.

 

[Project Ski]

I already have the back of the boat cut adjusting and grinding seems easy engouh. how much extra do you think you gained?

 

[Crab]

At least 25 degrees.:woot: :arms: :biggthumpup:

 

[cdubb]

Romack you got any more pics and a description of what you did?? I have read all the C.A.T.S. builds and stuff but yours looks cheap and easy

 

[meatball]

Romack you got any more pics and a description of what you did?? I have read all the C.A.T.S. builds and stuff but yours looks cheap and easy

Click his sig, its his website with mod descriptions :hail: