FX-1 Anybody Got a GOOD 650 Kawi Pump For Conversion?

[seatsR4toilets]

I'll buy or trade. I also need the bearing. I've got a brand new zxi driveshaft, so I'd like the pump & bearing to be new or like new.
As I said, I've got alot of FX-1 stuff I'll trade as well, but cash works for me.

 

[LIVE2RIDE Powersports]

I have 3.

1 has a skat ( not sure pitch) and x2 setup......125 ship'd

1 sx stock.....75 ship'd

1 has AM prop(not sure the kind) and x2 setup......125 ship'd

 

[seatsR4toilets]

I have 3.

1 has a skat ( not sure pitch) and x2 setup......125 ship'd

1 sx stock.....75 ship'd

1 has AM prop(not sure the kind) and x2 setup......125 ship'd

Which is the BEST one you have?

 

[LIVE2RIDE Powersports]

Which is the BEST one you have?

the first one

 

[seatsR4toilets]

PM sent

 

[butti]

seats,your better off with a non trim reduction nozzle ...if harcore will mix and match parts for you:biggrin:

 

[FX-Rex]

why? I thought the trim nozzle allowed you to use the same steering cable

 

[seatsR4toilets]

seats,your better off with a non trim reduction nozzle ...if harcore will mix and match parts for you:biggrin:

Ok, I'll talk to him.

 

[butti]

why? I thought the trim nozzle allowed you to use the same steering cable

maybe it would work better with a sj cable but i had to use a non trim nozzle to to fit an fx-1 steering cable.i guess it really depends if your using a sj pole or an fx-1 pole since the cables dont interchange.

 

[seatsR4toilets]

I just sent a PM to Hardcore and told him to PM you and you guys talk and tell him what you think is best for my deal and that's what I'll get.

Thanks for the help!

 

[LIVE2RIDE Powersports]

seats,your better off with a non trim reduction nozzle ...if harcore will mix and match parts for you:biggrin:

I can mix match anything u want. I will do that one with the skat with the sx nozzles if u want. Just lmk what u want and when u want it.

 

[seatsR4toilets]

I can mix match anything u want. I will do that one with the skat with the sx nozzles if u want. Just lmk what u want and when u want it.

Ok, great. Please have a short PM with Butti and tell me what you guys come up with and that's what I'll get.

Thanks for the trouble you guys!

 

[FX-Rex]

maybe it would work better with a sj cable but i had to use a non trim nozzle to to fit an fx-1 steering cable.i guess it really depends if your using a sj pole or an fx-1 pole since the cables dont interchange.

I used the stock pole and cable, x2 pump, ball joint on stock steering plate, heim joing on pump side and the length was good.

 

[seatsR4toilets]

I used the stock pole and cable, x2 pump, ball joint on stock steering plate, heim joing on pump side and the length was good.

Hmm....good info.
I'm using a AC aluminum handle pole on this build, with full UMI steering on it.

 

[chadman154]

the x welcomes seats....

seats, you have a few questions to answer on pwc today....when are you ready to man up???

 

[butti]

 

[butti]

I used the stock pole and cable, x2 pump, ball joint on stock steering plate, heim joing on pump side and the length was good.

sx nozzle = no need for the heim joint.

 

[tnj4life]

sx nozzle = no need for the heim joint.

Im going sx nozzle route too. For some reason I went with the x2 nozzle and never rigged my trim up so it just flops. I made extenders for my steering cable, no heim.

 

[special fx]

if you have the x2 nozzle and haven't tried rigging a trim setup to adjust the nozzle up, your missing missing out on a lot. I have mine cranked up about 20 degrees and it really loosens up the ski and makes it a blast in the surf. I tried a trim lever but I think the static trim knob is more worthwhile.

 

[tnj4life]

if you have the x2 nozzle and haven't tried rigging a trim setup to adjust the nozzle up, your missing missing out on a lot. I have mine cranked up about 20 degrees and it really loosens up the ski and makes it a blast in the surf. I tried a trim lever but I think the static trim knob is more worthwhile.

Pics? I have no imagination :dunce:.