- Location
- Central Wisconsin
Alright, I have my fx1 put back together and I took it out yesterday and the thing RIPPED hard! After a little riding, my pipe was getting way too hot so I messed around with that and got that dialed. Then, this morning, I found out that my flow control valve was making my waterbox too hot and it was making the foam around it smoke so I just took it out. THEN my tuning was pretty messed up. I tuned the low jets pretty much to perfection, but I couldn't figure out the high jet. I have a single sbn 44 on a 61x/61x with an fx1 chambered factory pipe, ada head (35cc domes), msd, lightened flywheel, it also might be ported but I dont think so. It has a 144 pump but i dont think the pump would make a difference. I have no idea how to tell which jets i have now, but the ski pretty much has half the balls on mid to high rpms as it did with the flow control. I was pretty sure it was hesitating up high so I kept giving it more and more until I was about one turn from being screwed out. I didn't feel much of a change but I think I was ripping a little harder when it was way out. So, does anyone know which high jet I would need since my low is pretty good. Like I said before, I don't know how to tell which jets I have now so any advice is greatly appreciated! Thanks