Advent T3 ignition ????

[accbr]

Blowsion has an Advent ignition listed for all Yamaha 650/701/760. Will this work with a 61x flywheel and stator? I thought Advents only worked with 62t electronics. I called Blowsion, and they said it would work.

 

[skinnyman]

Chuck at team scream told me 62t only with advent

 

[accbr]

That's what Chuck told me about 6 months ago when I was checking on a big bore and new ignition. I didn't know if this was a new ignition module that would work with both or not. Blowsion said it would.

 

[ChrisGooch]

I was also told (by chuck) 62t only a few months ago when i was inquiring.

 

[michael950]

Spoke with Craig (or Steve, whatever his name is) at Advent a while back, straight from the horses mouth... 62T only.


The last I checked, February 2007?, there was no Advent CDI for use with 61X. Something about not being able to get the timing right for the CDI to work with 61X & 62T :dunno:

 

[WAB]

I emailed Advent about it since I can't seem to find anybody to trade a 61x for a 62t flywheel & stator.
From what I understand, the pickups are at different locations on the stators. Even shough they use the same timing marks on the case to set the timing, it's more the 'timing' of the signals that the 2 different stators send.

 

[norcal ex]

62t only... i know from experience!

 

[WAB]

62t only... i know from experience!

Don't leave us hanging. What happened? Did not start, ran like crap?

 

[shepster]

I think Paul LPW has had some success with 61x electrics.

 

[norcal ex]

started and back fired and sounded like the engine was going to blow up. the vilder however works with both! Vilder is the way to go.

 

[shepster]

Do Vilder have a website ?
Best place to buy from ?

 

[accbr]

I emailed Advent about it since I can't seem to find anybody to trade a 61x for a 62t flywheel & stator.
From what I understand, the pickups are at different locations on the stators. Even shough they use the same timing marks on the case to set the timing, it's more the 'timing' of the signals that the 2 different stators send.

That's the main reason I haven't bought one yet. Blowsion's site says all years superjet and FX-1, so I was hoping Advent had changed it to work with both.

 

[accbr]

Do Vilder have a website ?
Best place to buy from ?

I looked for a Vilder, but couldn't find anybody that sells them either. They were around $700 new.

 

[Watty]

I've had PLENTY of experience with Advent's. Shoot me a PM if you need to know anything.

 

[D-Roc]

what about a advent for the kawasaki and use a msd total loss flywheel with a single pickup for the yamaha. If one could set the static timing the same as the kawi would it not work? My kawi 750 advent t3 just used a stock pickup and i removed the stator/magnets.

 

[Matt_E]

The signal of a TL trigger is entirely different than what a 62T stator puts out.

 

[D-Roc]

the pickup/ t3 for a KAWASAKI.
i may be unclear. Use the Kawasaki T3 advent in a yamaha, Use a Yamaha single pickup/TL flywheel, Setup the Static timing to be the same as the kawasaki (on the yamaha) to fool the T3 into thinking it is the stock KAWASAKI pickup.

 

[accbr]

You still have to change your flywheel if that works. I was trying to find something to work with my 61x electronics besides an MSD enhancer.