Custom/Hybrid 97 Superjet RN build

[Superthreat]

Blowsion stubby cone installed



Plastic Intake Duct removed.
Aluminum Intake Duct installed.
Jet pump unit cleaned up and re-installed. 9/15 hooker imp
New pump wear ring.






New Gelcoat

 

[Superthreat]

Cleaned up drive shaft coupler and re-installed.





Hull Re-enforced with fiberglass
Used 3:1 epoxy based resin
Biaxial Cloth for first layer, Stitched cloth for second layer for a smoother surface/look
Inside of hull painted white.

 

[Superthreat]

Modified Ride plate. Used a coffee can for D-cut

 

[Superthreat]

Installed steering cable
Installed new steering cable packing kit, and replaced missing stainless washer

 

[Superthreat]

Build a couple of jet ski stands out of 2" pvc
Gonna use 3" caster wheels so i can move them around
Built them to the height of my tailgate so i can self load/unload

 

[hink320]

Looking good! Where do you ride in BC?

 

[Superthreat]

Thanks!
On the Aarow Lake, Kootenay Lake, Or Columbia River. I usually launch in the Columbia River. its like 5 mins from my house.
What about you?

 

[Superthreat]

Finally finished the jet ski last summer. A big thanks to Jetmaniac and Wamiltons for all the help and parts.
Here are some pics from the build.

Ski Setup:
62T crankcase
61X Cylinders
Freestyle ported (by Blue), bored to 82mm and exhaust/head decked
New Pro-X top end with new pistons, rings, and wrist pin bearings
Lightweight flywheel 62T
Girdled head(pro design)
Factory b setup with dual cooling
Msd enhancer
V force reeds
Twin 38 mm mikuni carbs
After market waterbox
Jetting
137.5 main, 75 pilot, a/m flame arrestor- 95g springs

Other new parts
New Rebuilt Crankshaft by SBT
New engine gaskets
New OEM crank seals
New crank
Clean used 62t stator
New Bendix drive and hardware
New Blue Factory pipe coupler
New waterbox 90 deg hose. blue
NewSilicone Long exhaust hose -waterbox to bulkhead outlet. blue
New Voltage regulator/rectifier
NewFuel Visufilters
New coil and msd plug caps
New e-box

 

[Superthreat]

Crankcase Bead Blasted and Painted

 

[Superthreat]

More painted engine parts.

 

[Superthreat]

 

[Superthreat]

Frogskins for hood
More painted Hardware

 

[Superthreat]

 

[Superthreat]

Turned over first try!!
Built a pvc tray for the truck
After breakin period, this thing hits hard.




New hood and paint job (yamaha blue)
Custom decals added