95 SJ SN Buildup

[Super Dee]

How much of an improvement over the stock Yamaha cannon would you consider this mod to be? I don't know if you've been on a 701 stock motor with a B-pipe, but if you have, how does it compare to that? I'm assuming it's not as good, but how would you rate it on a scale of 1 -10? Say for example that the stock Yamaha setup is a 1 and the B-Pipe is a 10? I'm just wondering if this is something worthwhile I should look into doing over the winter since I don't have the cash right now to come up with a decent authentic pipe for my 701.

 

[gorilla]

about an 8.5 with a stock 61x motor + sn alum waterbox.


i had a 93 701 61x sn with dual sbn 38's on it + a f/b limited pipe.
ever time i try'd to ride, the chamber kept falling off-apart from the head pipe, so i sold it + never really got a chance to get it wet and see how far i could take it.

get an ex manifold 1st !!!
thats the key !!!

i have another stock 650 kawasaki pipe setup with an a/m longer stinger if you want to do some testing.
it needs to be mod'd + a the stock big rubber coupler replaced.
i had to use it on my sn.

good luck

gorilla

 

[Super Dee]

about an 8.5 with a stock 61x motor + sn alum waterbox.


i had a 93 701 61x sn with dual sbn 38's on it + a f/b limited pipe.
ever time i try'd to ride, the chamber kept falling off-apart from the head pipe, so i sold it + never really got a chance to get it wet and see how far i could take it.

get an ex manifold 1st !!!
thats the key !!!

good luck

gorilla

Hmmm this is really grabbing my interest. I think I'm going to look into this as a small winter project. It's already snowed here in Ontario once, so as far as I'm concerned, the riding season is done. I'll have to keep my eyes open for parts over the winter.

Thanks for the feedback too!!

 

[gorilla]

i just put some r-pot side trim tabs on the rear tonight.
the stock bolts for the black rubber coated metal piece that holds the side + rear bumpers together did not work, not long enough.
lowes had some longer stainless bolts.

i ran out of rivets putting it all together, so i will get some more on sunday and finish up that handling mod.

i'm going to glue some gorilla weights inside the engine compartment in between the gas tank and motor too.
these are the same one's i put in a fx1 in had last year.

gorilla

 

[gorilla]

r-pot side rear trim tab's - sponsons installed !!!
hope it was worth the banana's ???

gorilla

 

[gorilla]

i added a wetwork cone + an extra waterline to the exhaust pipe.

gorilla

 

[gorilla]

here's a pic of the ski - hood decals removed.

gorilla

 

[brett]

is there any other places to get info on the kawi pipe setup? i want to put one on to my sn

 

[gorilla]

you will need to find a ex manifold 1st.
i have another cheater pipe setup on the shelf, it just needs the oem big rubber coupler.
it's about $35 new from kawasaki.

gorilla

 

[Mile]

Has anybody got that kawi head pipe for sale, I want to do something similar with my old superjet... I need the pipe also.
Tnx

 

[gorilla]

in europe ???
is there a web site like craigslist over there ???

gorilla