94 x2 electrics and a 86 650 engine

From the replacement 86 engine I have:
2 yellow female plugs
1 Black Male Plug
1 Black/Yellow Male
1 Black/Red Female

In the original 94 electric box I have
2 Brown Male
1 Black/Yellow Female
1 Purple Male

I assume the Yellow and Brown will be ok together and the Black/Yellows should be ok
The Black/Red can only work with the Purple
So where does the black go? and is the above assumption correct and does this mean I need to pull the motor and switch the electric in the case with the ones from the old 94 engine?
 
Last edited:

shawn_NJ

Chasing waves.
Location
Daytona Beach
The extra black is just a ground from the stator plate to the voltage regulator, used in the 650SX's stators for some reason. See if your regulator has an extra female end. If not just ground the black to the EBOX ground bolt and all is well.

93 diagram
86-93_1.jpg


86 diagram
86_1.jpg
 
Last edited:
Top Bottom