88 650sx troubleshooting

[KIDbilly]

New silicone hose? Like from the WWW.SILICONEINTAKES.COM site or?

 

[WFO Speedracer]

Silicone hose or OEM hose will be fine, even a piece of radiator hose will work , you want it one piece if possible to eliminate as many potential leak points as possible , post that Aquamuff up for sale when you take it off some fool will probably take it off your hands.

 

[KIDbilly]

The low speed adjustment on this carb is only a qtr turn left to right. The needle has like a blocker on it from going anymore. The high speed is set at 1 3/4 turns out. Does that seem right with the low speed? It was set to just center of the two points.

 

[WFO Speedracer]

ake a screwdriver and remove that cap, it's just a plastic cap that pushes on there , then you can adjust it all you want , I always start at 2 turns out on the high and low speed and adjust in from there, it is easier to adjust from rich to lean than vice versa .