760 jetting question

[infamy]

just wondering what jetting i should use on this setup-

760 stock bore with mild port job
dual aftermarket 44's w/dual pickups
ada head w/38's
tbm lightened flywheel
b-pipe mod chamber
hooker 10/16


anyone with a similar setup? if so what are you running?

the carbs were setup by the shop that built the motor and have 120 mains 120 pilots in them with 2.0 n&s and black spring.

dont know if it matters but this motor is going into my surf boat.

 

[jetskidkid]

the way it seems setup up is all for low end power for freestyle you wouldnt want to hold it wide open possiblilty blowin motor

 

[guiness92]

http://www.x-h2o.com/threads/41027

 

[infamy]

http://www.x-h2o.com/threads/41027

thanks guiness. is this setup working pretty good for you? have you tried other carb setups?

 

[guiness92]

This setup works VERY good for me. But I'm not a tuner, I had help. :sneaky:

We went through about 10 different jetting specs before this one, and this nailed it. Unfortunately I havent tried any other setups because there was no need.

This jetting may not be what you need though, just showing what I use with a similar setup. I would call a shop and talk to a pro about it.

 

[jetskidkid]

do you have pictures of your setup?