demian5
Jet Ski FNG
- Location
- Lake Forest, CA
Hey guys - I plan on taking the skis out for the first time on father's day. My hood seal on my 1994 750SX is in bad shape. What is easily found that I can replace it with? Thanks!!!
SX/SXi/SXi Pro 750SX Replacement Hood Seal - Running Out of TIME!!!
- Thread starter demian5
- Start date
- Location
- North Carolina
Your cheapest bet would probably be to check with an automotive dealer and see about using weather stripping for a car or even try lowes hardware / home depot. It might or might not work, but you could even cut your own groves in strippig so the hull edges will push inside rubber seal. You might try to glue it down using Weldwood Contact Cement, I used it when installing my hydro turf and it worked very well. I purchased a 16 oz container at lowes hardware for like 9 bucks and you simply paint it on the hull where the stripping / seal will go and also on the stripping / seal, let them both dry to a haze and stick them together for an instant / fast contact. I believe the actual seal is almost 80 bucks if you were to just buy the seal for the ski. Good luck and I hope this helps.