- Location
- Holland, MI
I just got a oil block off plate put on but i don't know what premix ratio i have to run in it now. I have a 94 750 sx. any one have any ideas?
SX/SXi/SXi Pro 750 sx mix ratio.
- Thread starter joele21
- Start date
- Location
- Largo, Fl
anywhere from 32:1 to 100:1......
generally speaking, 40:1 with "standard" oil... maybe 50:1 if you are into buying high $$$ exotic oil.
generally speaking, 40:1 with "standard" oil... maybe 50:1 if you are into buying high $$$ exotic oil.
- Location
- Arnold MO.
100:1 lol. Why even run oil at that ratio.
50:1 Klotz is what I run and have always ran. Any decent synthetic will be safe at this ratio.
sxi steve
Life's short, have fun.
- Location
- Clinton Twp, MI
I do 50:1.
- Location
- Arnold MO.
I was told to use 32:1 with quality oil for break in by Zforce, not sure what to run after that but I'll prob stick with 40:1 like I always have
sxi steve
Life's short, have fun.
- Location
- Clinton Twp, MI
According to Kawasaki, for a stock SXi-Pro stated 60:1.
I use 50:1 with no issues.
I use 50:1 with no issues.
Octane_114
LeT tHe gOOd tImEs RoLL
- Location
- Charleston S.C.
I run 32:1, after the engine is good and broken in 40:1 93octane sierra tcw-3
Last edited:
- Location
- Mass
40:1 with wally world oil and no issues, also no motor mods.
- Location
- Holland, MI
yea i think i will try 40:1 because thats what my friend runs in his 750 and he has had no problems with it. I do have an exhaust and Vforce read on it if that would make a difference with the ratio.
- Location
- Arnold MO.
Youll be fine with that, Those mods wont need any change in oil ratio. I ran 40:1 for a few years now and plan on going back to it after this motor is broke in. For the record, My motor wasnt needing any repair, I just wanted more power. I also used quicksilver synthetic from walmart