701 coil

tubbs

X-
Location
uk
i had an intermitent spark problem this weekend so decided to fit new leads from jss

and i thought some of you might want to have a look inside at the brass pin if you ever decide to do it
i used i small flat head screw driver and worked my way around the old lead braking all the epoxy then give it a good tug and it came free i might of been lucky:biggthumpup:
 

Attachments

  • DSC00268.JPG
    DSC00268.JPG
    50.6 KB · Views: 41
  • DSC00271.JPG
    DSC00271.JPG
    48.4 KB · Views: 38

Mouthfulloflake

ISJWTA member #2
Location
NW Arkansas
thats good information right there.

I was told once they could be drilled out, so I proceeded to drill in there, and smoothed the brass barbs right out! haha

luckily it was an old spare coil.
 

ski4

gonzo
Location
cleveland
with some time it is a very easy job. i am actually runninga kawi 750 coil tht i did this with in my superjet right now, works like a champ

i would live to get some of the jss wire somewhere though to rebuild a spare coil i am sitting on now
 

tubbs

X-
Location
uk
thanks but i ordered from john know and he is fitting the terminals but for future reference have they got aweb site these napa people
 
Top Bottom