650sx water lines

[cr5001986]

I think have found my bogging issue, too much water in the exhaust, Do i have the lines hooked up correctly? The line off of the pump goes into exhaust manifold, i have a tee off of the head one line running to the fitting on the headpipe near the bolts, one running to back of pipe and a line with another tee, one to the pisser and one to the cone of the pipe, could too much water be running into the pipe, ski runs great for 20mins then after awhile it wont get on plane, take it out of the water rev it up a little and throw i back in and im good for another 20 mins, Here are some pics,

 

[crdnlplt]

Yeah that's not right. The line from the top of the head goes to the top/front of the pipe. Not t'd like you have it now. The one on the back of the pipe goes to the front of the pipe and is t'd for the pisser. I'm sure you can get an image from Google.

 

[b.lee]

Green line is 1 water line
Red line is 2nd water line

 

[b.lee]

another...

 

[cr5001986]

I definitely messed that up. I re ran the hoses, going to take the ski out tommorow, Thanks for the helpful response. Hopefully that was the cause of the bogging, because it ran great with the stock exhaust.