650/X-2 650sx duel cooling

[faceplant]

im sure thers a link out there or can anyone help with setting up duel cooling on my 650sx,im putting 9-17 skat in the pump so it will be out so i can tap the second cooling line if need be just need some guidance so i dont it up

 

[Vumad]

Tap pump. 2 lines to exhaust manifold. 2 fittings on head. 1st head fitting goes to pisser with a t that goes to the stinger. Second line from head goes to pipe, then from pipe to second pisser.

 

[faceplant]

do i need to tap a second fitting on my manifold?and also its a stock milled head where is a good place to tap that?

 

[Vumad]

To do traditional duel cooling, you need to have an exhaust manifold tapped for 2 lines and a head tapped for 2 lines. Manifolds designed for dual cooling (such as the westcoast) have a place for dual cooling. The westcoast for example has 3 flat spots, 1 in the middle on 2 on each sides. Put a brass threaded plug in the middle and a 90* fitting on each side. If it's only cooling from one side, just tap the other side.

The head has a flat spot to tap. It looks just like the place that's already tapped. Tap it in the spot that looks just like the other spot. There is a chance you have a head that doesn't have this flat spot. It could be tapped anywhere I guess. Usually the tap is placed on the same side (left or right) as the other fitting, and in the same location on the side opposite (So if the fitting is front right, you put the other fitting back right, symmetrically.)

 

[faceplant]

thanks dont sound too hard

 

[crzycamaro86]

Vumad do you have any pics

 

[Vumad]

Search the site for dual cooling. There is a lot of information about this on here. The Superjet dual cooling works for the 650sx.