agua
FIshing for Stand ups
- Location
- Seminole, Fl
Would a js550 with my 650 x2 engine have enough power to do anything with?
Last edited:
300/440/550 550 power
- Thread starter agua
- Start date
- Location
- Brigantine, NJ
Your JS550 w/550 power would have enough power to really learn how to "ride". Low power and small, lightweight will teach you to be a smooth, efficient rider when you step up to a better platform.......learn to ride, most people don't.
With 650 power, all the better!
With 650 power, all the better!
agua
FIshing for Stand ups
- Location
- Seminole, Fl
ive ridden an x2 and superjet for years just wondering if i did do that would it be a cheap good ski to have?
- Location
- Marshall, AR
I started with a bone stock 440 and had fun and learned alot. More power is better though. Have you considered an fx1? They come with the same 701 as the sj and have 2 easy options for bigger pumps. The js/650 coversion route is the cheapest route and one of the funnest skis if you like skinny/lightweight hulls. You will have cavitation issues especially once the motors modded.
Last edited:
- Location
- Neenah
cavitation actually lol. actually if you blueprint the pump and get a steep impeller. ie 18 or bigger you are usually good to go without problems. some guys even manage with a 17 and baraly have any cavitation from idle to WOT. just depends on how you set the pump up.
- Location
- Marshall, AR
sory, I cant spel.
- Location
- Marshall, AR
My stock 750 motor with low compression will spin the crap out of my impeller at lower rpms if I hammer it. With the way I ride i like a lower pitch impeller for bottom end, and thats not happening with that small pump. Wish it was as easy to swap the 650 pump as it is for an fx1.