300/440/550 44mm minuki carb on 650sx. anyone have jetting numbers? here's a pic--->

[kawasakisxs0ul]

my 1989 650sx just got a needed upgrade. from 28mm to 44mm carb! one problem... i am a noob at tuning. :ugh: so the question is what jetting sizes are you guys runnin on your skis? or what is best for mine??? my ski is all stock except for the waterbox, exaust, and now.. the carb/mani.
the setting of the carb when i got it are
i have inside the 44mm carb (mikuni)
**the small jet-0119
**the big jet-0140
**i dunno the pop off spring..
here is a pic:

 

[kawasakisxs0ul]

are my jets way off? cause the low jet has to be turned out 31/2 turns before its not lean... :/

 

[WFO Speedracer]

Yes if its turned out that far its way off,you really shouldn't have to go out more than 1 1/2 turns on the low or high speed screws.

 

[Crab]

120 low, 150 high popoff around 20-25 should be close.

 

[kawasakisxs0ul]

thank you crab, and wfo. so for my set up, does anyone else sugest numbers? i want to be sure that my set up will support the jets i buy

 

[kawasakisxs0ul]

so my friend on the forum "speedfreak" has extra jets hes givin me low-120 and high-145, i know crab you said to use 150 but he has it free so ill try it.. whatcha thinK?:?

 

[Crab]

Start the high adjuster about 1.5 turns out. Lotsa info here: http://pwctoday.com/f100/

 

[kawasakisxs0ul]

good suggestion crab, i will def start there. pwctoday and i arn't on speaking terms. that website and i dont get along.

 

[kawasakisxs0ul]

bump