300/440/550 440/550 to 650 conversion...top speed

what would be the best setup (440 or 550 pump) to use on 650 conversion to get most top speed? only weigh 120 so take off is not a problem looking to get 50mph out of 650 or 750 if i have to in a 440/550 hull...i know ? has been asked to death but most people looking for take off i want top end
 
Last edited:

jetski9010

Team RTYD
Location
Lancaster PA
You are going to want to run a 440 pump with a really tall pitch prop somewhere in the 18-20 pitch range. Should run upper 40's to 50mph range.
 

ger87410

How did I get here?
Location
Fort Worth
Get a couch. They can go up to 80 mph (speed limit set by USCG).

Pay careful attention to which ride plate and intake you use as both can reduce top speed.
 
You are going to want to run a 440 pump with a really tall pitch prop somewhere in the 18-20 pitch range. Should run upper 40's to 50mph range.

thanks...i dont have 650 electrical box or flywheel so i was thinking about Jetinetics High Energy Advanced Total Loss Ignition System, what do you guys think any experiences?
 
Top Bottom