Frosty
New York Crew
- Location
- Western New York
2013 Krash Industries Foot Rocket - hand laid by Nick Barton - one of the first imported into the states. very well build hull with no cracks or stress fractures. Perfect surf hull for sure.
I only rode about 2 - 3 hours a year for the last 4 years and only about 30 minutes this summer.
Asking $12,500 for everything - DM me
Located in Western New York - Sorry, will NOT ship.
I only rode about 2 - 3 hours a year for the last 4 years and only about 30 minutes this summer.
| 2013 Krash Footrocket |
| - One of the original, Nick Barton hand-laid fiberglass hulls |
| - Krash front foot hold, adjustable footholds and Dakine Strap |
| - Registered in NYS |
| - Extra ride plate (long uncut) |
| - Extra foot holds (brand new) |
| - Limiting rope and hood straps |
| - RRP pole (shortened) |
| - RRP steering - rebuilt with new orings and bearings last year |
| - RRP 50mm riser fat bars with ODI grips |
| Motor and Pump |
| - Dasa 971 PV- rebuilt with new crank and pistons 3 years ago |
| - 49mm Full Spec carbs with new Blowsion air intakes |
| - Dasa Intake Manifold w/ V-Force Reeds |
| - MSD Total Loss |
| - Power Factor pipe (2 seasons old) set up as wet pipe |
| - RRP waterbox |
| - Limited Slip 4 gallon fuel tank with battery box |
| - Torrent 148mm pump, shaft and impeller |
| - Thrust Innovations Trim |
| - Lithium battery w/lithium charger |
| Misc. |
| - Elemental cover |
| - Aquacart beach cart (4 wheels with hitch and winch) |
| - New tires for beach cart installed last year |
| - Scissor stand |
| - Squid Moose hitch Hauler - used twice |
| - Misc. parts including; 2 new bored reduction nozzles, 1 bored turn nozzle, 2 new steering cables, 2 new trim cables, misc other parts |
| - Misc. gear (helmets, wetsuits, gloves, PFDs etc.) |
Asking $12,500 for everything - DM me
Located in Western New York - Sorry, will NOT ship.
Attachments
-
6289286466755235144.jpg68.9 KB · Views: 35 -
beachski.jpg130.5 KB · Views: 36 -
imagejpeg_3.jpg114.2 KB · Views: 36 -
cables.jpg167.5 KB · Views: 30 -
parts.jpg171.1 KB · Views: 28 -
tray turf.jpg175.5 KB · Views: 28 -
cover.jpg213.5 KB · Views: 29 -
engine 1.jpg172.3 KB · Views: 30 -
engine 2.jpg177.6 KB · Views: 29 -
hull 2.jpg172.2 KB · Views: 31
Last edited: