Surfriding 2008 SJ....Super Tray ... Short, Wide, Strong. Almost done !

[Tyler Zane]

I have a set I designed gettin milled out this week. adjustable "bob" style holds.

gotta see this....

 

[Twinturbostang]

Not a good idea to redrill the bulkhead lower because water will come back up the pipe from the rear and fill the exhaust quikly when not running....especialy in surf.

I don't think the 6 more inches of straight to do it the way I did vs this build will change a thing. If you look at his the join is in the foam. The Z on our build is in the motor area and a welded pipe. It still has the Z so water isn't going to flow up to the water box. But to get a full tray foot hold you need the straight the length of the tray.

You can see it at wave daze.

 

[tensecrnr]

This is freakin sick...i wanna do it too my 09...

 

[MANFISH66]

Thanks for the kind words guys!!!

 

[IceRocket1286]

Hey that is bad to the bone, nice glass work! I LOVE the 08+ hulls....just gotta find a sweet deal to get BACK to the dark side....yikes! Might drop my limited sxr motor in a BOB or rickter?

 

[NVJAY775]

I'm putting rrp holds in mine, but they set off the sides of the hull a bit and I am kinda bummed about that. Spent a lot of time widening, which I am WAY stoked on, but the rrp's bring it back in a bit further than I wanted. Can't wait to see what you came up with on the holds. NICELY done dude!! Sweet build.

 

[sjetrider]

You know you could have just spun the pipe and redrilled the bulk head lower. That way you have a solid pipe in there. We just did this on a 08 and a 97.

But very nice build!! It's worth all the work for sure.

z tube is better IMO, more clearance for batterey and less backfill into waterbox, I have lowered both ways and learned that the z tube is a better option. Of course I had mine welded as z.

 

[MANFISH66]

agree 100%.