2 bilge pumps one switch?

[nokfir]

so i just installed a second bilge in my ski, i fused each one individually before the switch. i have the sano switch that mounts under the start/stop, wondering if anyone else is running two bilges on this swtich (just on/off). i tried to find some specs on the switch but cant find the max amperage it can handle. lemmi know if its cool to run both hooked to the same switch.

 

[Matt_E]

Each pump draws no more than 1-2 amps max.
Your switch is fine for that.

 

[nokfir]

k cool. does this setup sound right? i wanted both of them on indivudal fuses just incase one malfunctions i have another.

inline fuses on both hot wires (brown) from bilge. crimped both those lines together after the fuse and connected to one wire on the switch.

other line on the switch to battery and grounded both bilges.

 

[fals3illusion]

yupp, sounds good.

thats how i did mine when i had 2

 

[5810]

x3