super jet

I have a wdk weapon with a gp800 bored to a 997. Last summer my ski would bog out and die if i went from idle to half throttle if i feathered the throttle i could eventually get out of the bog and on the pipe but as soon as id let off the throttle and punch it again it would die. I tested the...

Hey guys, I was riding a freeride X2, all original hull, without a water outlet valve and it was going well with just the bilge pump. I now have a super jet for freeride, I'll send you a photo now. 700 cylinder engine, rebuilt for 760 std piston, carburetor and original exhaust, just with an...

Parts for sale Used JETINETICS Yamaha 62T LIGHTWEIGHT ALUMINUM FLYWHEEL:sold Brand new factory pipe chamber : 300 dollars Bilge pump kit with wiring and fittings: 75 dollars A set of blackjacks 46 setup for 781 from art brand new (without speedplate): 650 dollars Dasa intake v force 2...

Want to buy. Yamaha Superjet Two Stroke 2012-2020. Willing to travel or paying for shipping. Please no projects. Must be ready to ride. Thank you!

Waverunner 62T engine, new 760 cylinders with +4mm stroker crank with 800cc displacement. Blackjack 44mm carbs, R&D intake, ADA head porting and build done by CPT, less than 30 hours on build. Bought for a project but never used. Waveblaster 1 factory b pipe sold separately for $1050. Will...

As title. Cutting the outlet and re-welding it 180 degrees out should give you a nice ~18hp boost on a stock 701, from what I've read. Please do some reading on the modifications you need to make to this to run it on a superjet before buying. Includes the aluminium head bracket and all...

1995 wave blaster 61x stock motor stock exhaust. I'll post pics of the engine cavity in the next few days. Custom paint job! I'm really on the internet best way to reach me is call or text. 6I6/8I3/364tooo Located in Muskegon Michigan willing to ship at buyers expense. Also have a nice two...

Hey everyone! Need some advice with the latest trouble that's been plaguing me all season on my 1991 SuperJet 650. Here is the backstory. The ski got taken out on the lake for for the first time of the year and it ran pretty good overall, but it seemed to sputter between 1/8th and 1/2 throttle...

1996 Yamaha Superjet Stock 62T motor with “00” cylinders Rebuilt carbs with OEM Minkuni Kits Shortened pole Ada bars KVPI Throttle Worx Rideplate Riva intake Wamaltons hood and nose piece Jet trim with lifters Text me 516-232-3383 4k ski only 4.6k gets you the Fresh and salty tote and...

Just curious if the VF-3 reeds are any improvement over the VF-2 reeds? Ski is a superjet with a 760 ported and factory dry pipe 9. Thank you

It's not 1990 anymore we need a new hull material. Polyethelene, polypropylene, abs, uhmw, or seadoos polytec, are just a few that come to mind. Hulls can be made lighter cheaper and more durable then fiberglass or carbonfiber. Cad programs, and newer technology have come along way, If we come...

Brand New Oem Yamaha Parts List PARTS ARE LIVE ON THERACESHACKMARINE.COM Message or reply to the thread to order parts. We supply almost every Yamaha OEM part for a Super jet! Yamaha Oem Brand New engine motor mounts $60.00/EA. Yamaha Ignition Coil assy $155/EA. More parts are in stock...

For sale Oem 144 stator Oem Sj driveshaft Oem reduction/turning nozzle Wsm 144 impeller housing with replaceable wearing. (wearing needs to be replaced) Skat trak 14–19 144 mm impeller. (Should be re Worked) asking $450 for everything! Located in Menifee California

Selling my custom triple 1100cc swapped Kawasaki 650sx! It has a lot done to it, the hull was shortened 6 inches, the hood was shaved along with part of the hall to match the hood. Tray was widened with custom fiberglass foot holds, The front of the ski was rounded, reinforced and the...

DONT WANNA WAIT FOR A NEW ONE

As title says I'm getting low compression in both cylinders around 120 psi in my 61x engine . Is replacing Rings and Pistons my best bet? Any upgrades I might as well do during a rebuild?

problem need some solution I had an overheating on 701 engine, 81.5 piston , factory B pipe dual cooling system , TDR water box , and ADA head the problem started after 1hr riding and the cooling system was ok , once the engine got overheating I switched off and now the pressure on the rear...

Round Nose Superjet waterbox for 150.00 Shipped in the US

Hey, guys, I was wondering if someone could help me with mods to build a fast top speed superjet I have 2014 super jets with the following mods Msd enhancer cool head ada 38 cc domes (running 760 cylinder around 180-190 95 octane) 44 blackjack carbs with dasa intake and vforce 2 factory...

Anyone have a square nose bumper lying around that they want to sell? Can’t seem to find them anywhere.