Search results

Went through 4 Yamaha switches so far between all my skis.

I also run a 9/15 hooker. I love the low end snap. Sent from my DROIDX using Tapatalk 2

I just finished assembling my b1. It has 62t cases 62t top end daul 44 from a 760. Carbs just rebuilt. Stock 760 jetting. It runs fine at 1/2 to wot. Seems like there is a major stumble from 1/4 to 1/2. Were you hit the gas and it wants to die. But once you get past it it runs excellent. Any...

Mine had a factory pipe oringinaly. Someone ran a metal pipe under motor and connected it to the rear. Sent from my DROIDX using Tapatalk 2

I used the stock 650 exhaust. Sent from my DROIDX using Tapatalk 2

I've had a 650 swapped raider. It ran fine top end just lost some holeshot. Got the job done Sent from my DROIDX using Tapatalk 2

Neither have I. Are you sure its the case number not the motor number. Sent from my DROIDX using Tapatalk 2

Mine are all flush no peeling Sent from my DROIDX using Tapatalk 2

Float works as another switch. Wire it in series with rotary switch Sent from my DROIDX using Tapatalk 2

Eboxs are the same. 701cdi has a higher rev limiter then the 650.

Yes bolt it In. The 650 pipe will work. Just has smaller exhaust ports

61x has 4 magnets and 62t has a full ring

Thanks guys I will do that. I have an ada head with 37 or 35cc domes.

Yupp factory b pipe.

Yes they are stock 38 carbs. Both seats look good.

Ok so I tried all last year to get this thing dialed in with no luck. It will start right up and idle perfectly fine. It will rip your arms off at 5/8 to full throttle. But I have all kinds of bogging for just off idle to just over half. Carbs we're just rebuilt. Has stock n/s 145 main jet and...

Were did you find them for 100 bucks or is that subtracting the difference of a normal battery

I love it man. Might be next winters project for my ski

ok so i am in the process of building my sn. it has a 61x motor ada head and protec pipe. i just picked uup a 96 701 raider with 62t with a factory pipe. i am going to take the trim system off and use in ont the sj. but what shoud i do with the motors, use the 62t with 61x cylinderrs or the...

i am trying to make a decision about my winter build and i cant seem to figure out what to do. i want to a better freestyle ski. right now i have a sn with a 701, protec pipe, high compression head, 701 cdi, scoop grate ride plate bars foot holds prop. and some other stufff im sure, here are...