Search results

Leak down test before you tear it down. Do you run open flame arrestors or the stock air box with the Wax adapter?

Dose it cook the stator and cdi when you are out riding or when you go to restart it? Ground cable crimp at the battery looks less then ideal and looks like is going to a dasa flywheel cover. It should reach over and hook to the top 1of the starter mounting bolts.

https://leestoneproducts.com/collections/fuel/products/lsp-50-carbs

Rod bearings?

In line boring bushings for heavy equipment and general rule is a .001 per inch of bore of interference fit. If OD of bushing is 2" then ID of housing is1.998". I not sure if is the same for a roller bearing but id imagine its in the ballpark. Id say get new seals and bearings and open up the...

I had a wavejammer that ate rocks in a prior life, I took a skinny wheel and sliced it up to remove it from the shaft, but it was a soft aluminum one, might take quite a few wheels to get though that stainless one.

Are just the bearings failing? I'd have a hard time thinking that a stainless steel wear ring/stator that has no moving parts would fail. Got any pictures?

Sorry for dragging our group down, I'm a Tomac fan and kept putting him towards the front. I got a couple more people to join next season hopefully with more rational thinking for the xh2o team. Great job SUPERJET-113

rickter edge fr, it's a 140 LB hull.

Copy, thanks, probably a little steep for my edge JM781, 46's, bpipe combo. GLWS

What prop is in it?

The smallest part can bite you. The woodruff key sheared on my SN, ski would start for a second foreword, then motor would go into reverse, ie, start pumping water backwards.

I broke a Blowsion pole spring 3 seasons ago, tacked it back together, then welded a nut over the tack to tie the pieces together. The heat from welding made the spring a lot stiffer. Pole is weightless while riding, even off the bike it will go to full mast just from the motion of the ocean!

Hey, I had a slow start. Still got a free shirt for my kiddo. Outdoors is going to be anyones quess. Still a big Tomac fan, beast mode all the way!!!!

My thoughts were to put these tabs back here so you could flip the adapter and still mount the air box either way.

I think it should, this was In the first post.

So I got mine installed on my JM 781 with a PHP manifold and 46's in my edge. Need a stubby allen wrench or a ratchet to get to the pinch bolt and a good bit of braille to find the bolt. The only thing I think that could be better is the surf adapter could have tabs on both ends for mounting the...

Just got my adapter, looks great just a couple questions. What are the holes for in the bottom for, water drains? And the threaded ones in the side?

OVP for the win! Moves you forward just enough and tightens up the steering response. On my SN all I had to do was peal off some staples and cut enough of the hard plastic n restaple and cut the excess vinyl to clear the bars in full right lock.