Search results

Yes. That'd be perfect. I have the carbs, cleaned jetted and ready to install but thinking I made the mistake of selling the bases with the old manifold.

If the adapters are included with them then I'm definitely interested.

Looks like the box is laid over on its side a little bit. Orient it vertical with a hump hose after the box and I think you'd be ok.

WTB a cheap pair of mikuni 38s for Yamaha for parts. Or, more importantly a pair of base adapters

https://www.x-h2o.com/threads/carburetor-specs-database-superjet-and-blaster-1.19403/

To the lake : - CDI - start relay - volt regulator - ignition coil - starter - Bendix - stator - spark plugs - fuel filters - hose clamps - water line - primer line - fuel line - primer bulb - pipe coupler - zip ties - fuse - woodruff key - flywheel puller and hammer - sockets and ratchet...

You don't need conversion plates. I put a Yamaha 789 in my 2020 reaper. All I did was swap plates left to right then drill and tap new holes.

1. Prok flame arresters 2. Dual OEM 44 3. VF2 reeds 4. Ada intake spacer 5. Finger ported 62t cases 6. Ported Jetmaniac 61x cylinder 7. Blowsion big bore sleeves @789cc 8. Wossner pistons 9. Ada head, 35cc domes 10. Big bore Factory B, limited chamber, 11. ATP water box 12. PFM lightened...

Take one of the screens out of the F/A

You'll need 760 cases with that or clearance the 701 cases for the larger sleeves. Sent from my moto g power (2022) using Tapatalk

You can run big bore sleeves in an x cylinder. I'm using Blowsion sleeves in an old jetmaniac ported 61x on my reaper....forget what size pistons but it cane out to 787. Sent from my moto g power (2022) using Tapatalk

https://www.pwctoday.com/forum/general-interest/general-pwc-stuff/90117-the-much-needed-and-way-overdue-how-to-paint-your-jet-ski-thread Sent from my moto g power (2022) using Tapatalk

I think it was on PWCtoday but there's a great thread from years back written by "waterdoglouie" about painting a ski. Might take some scrolling but if you search his profile it's prob be a quick find. Sent from my moto g power (2022) using Tapatalk

After removing the seat from my yami powered 2020 reaper I stole this idea for the hood latch. Worked great. Much better than what I was gonna do by having a latch on each side of the hood. Thanks for the idea. Sent from my moto g power (2022) using Tapatalk

Not trying to thread jack but if someone is looking for kawi 750 porting templates you can find some info here that are from the XIR race prep booklet from Kawasaki...

...

...

...

butchs catalog

Kawi XIR race prep manual