Search results

Thanks for your response. I figured it out. Pop off was good. Stock settings were too lean. I thought this might be the case since when I rolled the throttle, it was fine. I am only running 1 screen so it needed more fuel. I tried to include everything in my first post but I always seem to...

Hi guys. I have a really nice 1100 triple from a fresh water Wave Venture in my WB1 that seems to have a bog when I smack the throttle. If I roll the throttle, it's fine or smack the throttle once the pop off has popped the needle jets open, like from mid throttle to full it's fine. Idles fine...

I'm thinking of using 2 cables, 1st cable from the handle bar lever to a lever set up in the hull, & the 2nd cable from the lever in the hull to the nozzle, to get more throw out of it. If the 1st cable connects to the lever in the hull in the middle of the lever and the 2nd cable going to the...

A raider trim nozzle bolts right up. Use the entire Waveraider nozzle set up, the steering nozzle, trim ring and reduction nozzle. I'm making a bracket that will come off of one of the mount bolts to hold the cable. Pretty simple.

Ahhhh, I see. I'll have to check my local bike shop to see if they sell stainless cable by the foot. Thanks for the tips man!

Everywhere I have been reading about this cable states the cable housing is 3500mm long (or about 11.5 feet), but the longes cable is only 2500mm (8.4 feet). I copied the specs below from the Jagwire site. Specifications Housing Construction: CGX Coil-wound Steel w/Slick-Lube Liner...

Ok, it says they are stainless. Nice find man! Yeah, definitely let me know how it works out. I'm very interested in a stainless cable that long at that price! Thanks!

It the cable stainless because if not, it'll rust quick. That's my only concern with universal cables. I can't seem to find a long, universal, stainless cable so I was hoping someone that's built a C.A.T.S. set up already could let us know what they used. I've searched for this on this site too...

Hi guys. Not new to ski's but fairly new to swaps so please be gentle. I have a B1 with a Stock Yamaha 1100 swap and the throttle cable is starting to fray. What do you guys use, the blaster or raider cable when you do the swap or can either be used? The swap was in it when I got it. Also, what...