Search results

Proformance, great job on the foam placement, I'm doing the same right now on my RN, but decided to go with a more loose arrangement to allow the water to get out easier. I am using styrofoam up to the tray area, and they using two part foam above for rigidity. I have to disagree. If water...

Yes, I run both inlet hoses to the manifold for safety. If one get's clogged up, the engine and pipe will still cool... I run a pisser off the front of the head with no restrictions, and another pisser off the head pipe that has the T to the stinger in it. As for the 3 cooling outlets in the...

Do a search for factory b-pipe dual cooling setups, and that will give you and idea of what you need to do... there are two rules of thoughts in dual cooling, one has both supply lines loading the one circuit as Mustang said above, the other has one line cooling the exhaust while the other is...

Yep, that is the placement for the brass fittings.......

I chose to go with some 1/4" MIP x 1/8" FIP bushings tapped into the fiberglass and sealed with 5200, and 1/8" MIP plug. I can get photos later when I head out to the yard.

Well, I just drained over 1.5 gallons out of my SN last night when I put drains in the back and it is still dripping... So whomever thinks it's not worth putting drains in, is :trink26: some good shiat... This SN was already re-foamed, reinforced under the tray, and the whole tray area sealed...

Break away from the Green Team.. :slap:

Get a standup and use the boat to ride in... Ditch the couch... :popworm:

Bigbore = Wiseco flat top stock bore SJ = Pro-x couch = WSM Platinum :headbang:

I'm almost in the same position as you are. I have de-foamed the RN and will start packing the styrofoam in tonight/tomorrow. I will do the same thing as I did on my SN (what Kennay described) when putting the tray back and then when the epoxy/cabosil is still wet, laying some mat down and...

yep, that would work...

Is this why Harrison is riding his bike so much? :highhorse: ***Just kidding Harrison***

The Captain posted all the videos taken on his camera on youtube for all to see. And yes, earlier on the Captain did point to the first wave/wake on the starboard side of the boat as that was the one cresting at the time. :puppy_dog_eyes:

Since that video was neither taken by the Captains camera, nor posted by the captain, and there were no hand gestures made by said captain (unless smoking a cigarette is construed as a hand gesture) then I have no clue what you are talking about. :twak:

Did you come out of the tray? Looking at the video it didn't look like anything went awry... Good luck on the rehab!

Different yes, better Not so much... Would you care to elaborate?

:headbang:

The Gator comment was tongue in cheek, but I was serious about Hillsborough Inlet. 90% of the time it is either flat calm, or wind swept crap. there just is not enough fetch from the Bahamas to the inlet to get any kind of clean swell there. She means couchers...

:chairshot: Anytime a 'coucher' can nose stab his ride in 8+ foot surf better than any 550 rider I have seen, then a little respect is deserved.... :pancake:

That is a big arse couch to be throwing around like that. Good find...