Search results

I bought: 30' of clear red 3/8" ID water line 30' of clear red 1/4" ID fuel line 10' of clear red 1/8" primer line from fuellineguy on eBay here is his store: http://search.ebay.com/_W0QQsassZfuellineguyQQfrppZ50QQfsopZ1QQfsooZ1QQrdZ0 I got all that for 50 bucks shipped. I know...

We started the day out driving all over town looking for a wet suit for Steve aka YZ250FPilot since he only has a shorty. Then a stop by the Gander Mountain store was necessary to get a pair of neoprene socks. I already got a pair of socks and a pair of gloves earlier in the week. Now you...

Just curious how you guys got the choke plate screws out. I know that Kawasaki or Mikuni whoever "batters" the ends so they will not vibrate out ontheir own. On an old ski I had, I simply just used a screw driver and twisted took the screws out. On this 800 SXR set of carbs I have, the...

I just recently bought a very clean 800 SXR engine i am going to put into my X2. Well I want to add on a few bolt ones but wanted to get you guy's advice before I buy anything. Here goes: Timing Advance. I was going to short the air temp sensor but Kahuna said to just get an advance plate...

Well I have been looking for one for some time for one of these and I finally had ot break down and opend my wallet a little wider. Sad to say but this engine cost more then the purchase of BOTH of my two X2's. Then again I paid around $850 for each of them. In the end, I am happy. This...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110227009667 No real pic but for new that is a good price. Also check out this stator: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AB%3AWNA%3AUS%3A1123&viewitem=&item=360024044279 It is for...

http://cgi.ebay.com/ebaymotors/KAWASAKI-JF650-ST-JH750-starter-SWITCH-CASE-NEW_W0QQcmdZViewItemQQcategoryZ35594QQihZ011QQitemZ320155453136QQrdZ1QQsspagenameZWDVW I know it is 55 bucks but the best I have found is 64 bucks on Ron Ayers.com and Ron will rip you for 15 bucks shipping... I know...

Hey California or close guys check this out: http://cgi.ebay.com/ebaymotors/Kawasaki-X2-jetski-personal-watercraft_W0QQcmdZViewItemQQcategoryZ31265QQihZ013QQitemZ230224412439QQrdZ1QQsspagenameZWDVW If I lived close to there I would be all over this one. Then again I was all over the one...

Well I own two very nice, well maintained, very clean barely used Kawasaki X2's. I have been hording parts for years to do a super X2 build. The power plant for this build I plan to use a Kawasaki 800 SXR. Yesterday I ran across an SXR with a FPP, Mac Masher foot holds, an intake grate, a...

I was wondering how and where the trigger plate mounted on an 800 SXR engine. I assume it mounts on the front of the case/flywheel cover like the stock stator? And i also assume that the fywheel is similar to a stock wheel... I am planning on putting an 800 SXR engine into my 650 X2. On...

So this is the crap that typically happens to me. I must say in this case that it happened because I was playing on the jet ski boards or browsing my pdf service manual instead of doing real "engineering work" at work last week. So I bought a few face plates, one for a 440/550/750/800 and...

Darin, Could you put the log in text boxes on the front page? If I am not logged in, I have to click Forums, then log in. I usually just click the New Posts link to browse threads. So after I log in, I have to click home and then the new threads link. Just a little annoying sometimes. DAVE

Usually when I post, I will attach my signature on my first post. After that I don't atach it to help reduce the clutter. I don't want them gone completely but just one sig per person per thread.

http://www.trickracing1.com/The%20First%20CR500%20Made%20into%201000cc.html I was searching for CR 500 cylinders on google images. My goal if I was highly skilled fabricator is to make a V4 ski engine using 4 CR500 cylinders. BRAAAAP!

http://www.x-h2o.com/threads/25189 I bought the FPP 650 manifold fromthat post. Radney sent along pics ASAP, answered all my questions, and shipped promptly. I recievied the manifold in a timely manner as well. I am just stocked to finally find a clean FPP manifold for my X2. FPP has...

Ok guys, I have a Coffman Exhaust, and a Factory Pipe all for a Kawasaki 650 SX/X2. So I decided to measure them all up and see what sizes they were. I was truely shocked at how small some of the diameters are! Especially where the head pipe meets the exhaust manifold, the head pipe meets the...

I was looking on Waterdawg's site where he makes a pump shoe to fit the 155 Yamaha pump into an SJ which normally has a 144 right? I know a Kawasaki 650/750/800uses a 140. So what does the bigger pump give you? I am guessing more thrust since it has more volume. But I remember reading how...

Here you go: http://www.addictinggames.com/braapbraap.html

Look what I found on DASA Japan's website: http://www.dasajapan.com/newpage03.html And I am sure you all know about SE's engine: http://66.249.91.104/translate_c?hl=en&ie=UTF-8&oe=UTF-8&langpair=ja%7Cen&u=http://www.speedmagic.co.jp/parts/800SXR_FS/800sxr_FS.html&prev=/language_tools...

I know Maekawa Engineering made them in Japan. It looks like on their website now they are out of that hull business :( There was another company but I don't have the link anymore. I don't think Shin Racing made any hulls. They were more of a hop up shop. So here is a link to the Maekawa...