Search results

My 1996 SJ701 came to me with a trim kit. Based on comparing the ride with the trim kit enabled versus when the trim is set fixed / static, I believe at least my ski wants to porpoise more with a trim kit. Mine does not have a return spring and I have never tried a return spring but I doubt...

I am changing what I think is a stock handle pole on a 96 SJ700 for an RRP cast aluminum pole. The pivot point fasteners in use were as shown in the picture. I knew I did not have a spring and bought a new one in preparation for the new handle pole installation; however, my fail, it was not...

Hello, These 2 wire connectors are at the end of the wires running from the SS-switch. This is a 96 SJ701 and I am in the process of switching the stock handle pole for an RRP one, and it seems like this is a necessary step. If someone would please describe exactly how they can be...

Apologies if the questions are noob. My ski is a 96 SJ701. I am sorry that I do not know about it better than i do. Most of what I know about jet skis I have learned reading here, so all help is appreciated. The picture is of the back right lower corner of the engine compartment. What...

If an RRP pole with tubes cut to the recommended 23.5” and installed such that the +2” to -1” adjustability is possible, then what would be the straight line distance as measured from the centre of the bolt that mounts the pole to body up to a point even with the steering pivot?

Hoping to solicit opinions and a bit of a discussion about the pros and cons of front sponsons for the 4-stroke superjet for various types of riding, and would really appreciate thoughts and experiences especially from those that may have already tried same.

Hello, I have a 96 superjet with a mikuna SBN carburetor. It has been running awful. I changed the plugs and fresh gas and made sure the gas is flowing ok. I cannot seem to get a low idle setting that is ok, and which then will be ok giving throttle and getting off throttle. If i try to...

Hi - My question regards what are likely ways water is getting into the back chamber under the deck. Some info as context for my question: Please see the attached picture of the back of my superjet (sj700 roundnose circa 1994-1996). I got it a few years back. I believe all the foam was...