Search results

allright...no one has gave me a heads up on the relay jump thread in driveline, so I asked a friend at church and went about it in true "Darwinian" style. I almost put natural selection to work. I've got an analog TL that seems to be wired correctly. However, when I try to start it all I get...

Does the exterior cylinder temp (manifold side) get high enough to melt the H2O plumbing going to pipe? My plumbing leaving the head lays against the cylinder going to bottom of pipe. Deciding if I need to rerout it b4 first ride.

i know, i know, i know...but I can't find a solid answer so I'm posting. Routing the cooling. I'm running a single line cooling setup on my 61x, limited bpipe, TL and solas 13/16. I've got one cylinder-head outlet going to head pipe. Planning on running the other cylinder-head outlet...

Gear heads, i'm planning on checking the dynamic timing with an inductive timing light. I've set my static timing at 28 degrees (-5 = 23 actual). With the ski idleing should the timing light show me timing of 28 or 23? Since the marks i made on the cases are only 5 degree increments do i...

Facing the flywheel, what direction does the crank/flywheel rotate? Is it CW or CCW? :scratchchin:

This is SJ 101 type info., but in any case, here I am. Anybody got pics of an adaptor. What's it do? How do you know i u need one. I've never used an aftermarket throttle lever on a SJ (SN). I bought a SE off Virgin last week. It bolts up fine to handlebars. Gonna run the throttle cable...

I'm in the middle of wiring my oem start/stop and lanyard to my TL (analog). Directions are a little vague. Looking for some advice. I've got a BROWN/RED coupled together and a WHITE/BLACK coupled coming from the oem switch. The TL directions say to wire one of those sets to the pickup leads...

u guys use one after a rebuild? I destroyed mine with sanding and grinding. Do i need to have it? Check the link... how about part #33? Do i need that thing too? http://partsfinder.onlinemicrofiche.com/xtremepowersports/yamaha_oem/YamahaPWC.asp?Type=18&A=38&B=18&Action=O

You guys that have run TDR water boxes before...are they alot louder than stock? I had that and a Riva Red pipe last year and my ski was pretty loud compared to others. Is the noise primarily from the water box or was it the Riva pipe? It had a nice, quick rev sound, but the decibel level was...

I'm gettin ready to install breather tubes for Louie's hood. Whats the best way to secure the tubes to the hood? I'm using 2" ID pool vacuum hose tubing. What's the probs with drilling the holes and no hoses? I've got a small breather hose 1-1/4" in pole bracket, but planning to breathe x2...

guess what biotches...louie's nose and hood made it yesterday:Banane09:. I was busy and forgot to take pics (sorry Kennay). I'll try and get them up today. I'm gonna shoot Louie a PM, but I didn't want to bug the shiot out of him with little questions. Take a look at the link (#47)...

didn't want to hijack the bearing rebuild thread. should there be any lateral play, wobble, wiggle to a midshaft? i pulled mine prolly 2 months ago and just put it on the shelf. got ready to install it today. shot some grease in it and saw a little teardrop of water come out of inside seal...

u guys know if I can buy generic gasket sheets and cut my own. i forgot to order the set between the flame arestor and the carb and don't want to wait on shipping from someone. i was thinking of trying one of the local autoparts stores.

Brace urselves boys, this could get knee-deep in noob poop, but here goes. Where does the stator/pickup go in relation to TDC on the initial install for a TL. i've got an old, analog TL, so i don't have the indicator light to help figure out static timing. I found TDC and marked the...

been trying to find good pics of SN bracket used with RN pole. x2 rags did it, but couldn't get pics to enlarge. anyway, looks like i'm gonna need to grind off the pole "kickstand"/stay support and slightly move the starboard side hood hook in ~1-4". that sound right? talked to mcdog and...

what's the best gauge/tool to use to determine tdc? can i use a compression gauge and just watch the compression hit it's max? i was looking on the web for one of those dial indicators for tdc. i've never used one, so i don't know what the dial is measuring for tdc. northern tool used to...

is the flywheel nut left or right handed threads? i tried to remove my flywheel this evening. had the coupler held in a vice and used a long handled ratchet with a extender bar...all i got was the coupler unthreading from the drive shaft. am i turning the wrong direction? facing flywheel i'm...

i just tried to use an "easy-out":banghead: to remove a seized bolt from my intake/reed cage that snapped off when i tried to take it out with a socket/ratchet. first i put on some penetrating oil and let it soak. then i started to tap the bolt for the easy-out to pull it through. the easy...

any of u guys know that the billet, impeller nose cones are unavailable except through Solas with the purchase of prop? i tried to get one thru riva and they told me you can't get one individually??? That seems a little strange...anybody know something?:bsflag:

i'm about to install my used tl. i got the install manual from the MSD website (thx yamacat and wetjet701). the install instructs are for the new programmable brain. i've got the older program brain with the removable modules. without having the indicator light on the brain is there anyway...