Search results

Thanks I`m going to stick with the single carb for the surf and only use the 61x in the proforce as a backup or for endurance rides. Still scratching my head wondering why if it works in a 61x why not a single on a 62t? My jetting for my 48 is 140m 125l 2.5ns 95gr 1turn out both, I never...

I believe this post to be accurate as I have ran a 61x with a 44 wide open and never had a problem. My question is Why do you think a larger carb is more prone to stick a piston? I run a single 48 tuned with a 2.5ns although I do not run wot for very long in the surf. I was just curious as I...

Offer on package deal sent via PM

You can just showup pay 10$ a night and camp anywhere s/o post 2 . The main group is ususally at post 4

OOPS I`m 10 years off on the prop you definately need a new one . The hooker 9/15 or an equivelant swirl type would absolutely be the first mod to make. An oem 08+ SJ prop for a good price will work great and save money for the Bpipe

I had an 08 SJ ride surf in the pacific ocean and these mods are what i did to mine with the exception of the prop . The oem prop in the stock pump works fine, although the hookup of a mag pump in white water is significant . A B pipe will wake up the ski a bunch and will give you what you...

Always enjoyed partying and riding with You Colorado guys in Pismo but me and Rick have missed you last couple years. Maybe meet up at Oside instead this year waves have been good. So many things to see and as always time is short

Oh man you can say that again there is always the possibility of HUGE surf, storms in the gulf of Alaska make for killer waves Really..I pray for favorable weather and light winds head high outside sets but you just dont know what the conditions will be at Pismo it changes quickly ...

Sounds like a fun expedition I plan on doing the same thing but in the other direction visiting Daytona. I would recommend riding the waves at Oceanside you can camp overnight or longer in the parking lot. The wave riding is usually Great and its convenient easy to do, flush your ski`s etc...

I really like my single 48 powerbomb on a matched up intake manifold with conversion plate. Its a setup thats been around along time and should be easy to find try posting in the WTB section bet there is alot of them still out there . I use this setup on my freak in the surf and it works great...

well that connection is not to good I guess, dont remember my 08 Sj giving me any problems but maybe I did replace them eventually . I use dielectric silicone grease on mine as it make removal easier as i have had the msd boots break too. It helps in salt water with high voltage and the...

Why change the spark plug boots? oem is Very good they last a long long time are the new ones not the same as they used to be ?

I bought the hose at a place called Captains Locker its next to the marina here in Long Beach they cater to yaghts mostly. The red hose was 80$ a foot and the blue was like 40 something. no more blown couplings !! They make all sizes

This is what I use on my TNT V3 after blowing a few cheap 3.5 couplers. Its a 3.5inch red 600 degree inner exhaust hose (pricey) shoved inside a heavy duty 400 degree silicone marine exhaust hose that is 3.75inch id . I bought this hose at a boat supply place and it was EXPENSIVE . It can...

I cant wait for the new ones to come out . South Africa makes a nice hull and Yamaha quality is top notch

They just need to be ridden every other day. Use it or lose it :p Seriously mine dont stink but they get fresh fuel regularly and I dont use one way valves either they vent with long routed lines either coiled up or up and down handlepole as I have had a couple of cold fusion tanks split open...

I would like to share my experience with my race buoy boat using a TNT V3 race spec pipe I purchased from Tim T. a couple years ago. It has a slightly smaller diameter at the end compared to his usual V3 and has a second water injection. I am running it in my Proforce with a Yamaha twin, 780cc...

WD40 or a solvent tank and compressed air .( Patience) small wire brush maybe ,scotch pad , chase the threads out with a tap. I use paint stipper clean it really good and give it a fresh coat of good paint also I tape some 80 grit metal sandpaper to a really flat surface a granite countertop...

I recently installed a 148 Maxx setback with a Blowsion 148 pump shoe and 7/14 from JM in my Badass hull and it looks like anything bigger would not fit.. The pump tunnel is not in question to me but there just is`nt enough room between the bottom deck and the ride plate. The hull was designed...