Search results

I dont have any pics but I used a hole saw and just shortened up the drill bit and carefully drilled (2) 2 inch holes near the front of the hood in just the liner be careful as there is probably only 1 inch between hood and liner and used Frog Skins I bought from Blowsion in 2014 .You can buy...

I offer 250 shipped

My bad thought perhaps with additional parts other carb could be used as a single also glws

I am interested in 1 of these carbs for a single carb motor? Just thought i would throw it out there or a free Bump

I used a pump seal that I ground (sanded) flat on the top to fit, and also ground into the carbon hull for fitment on my Freak . Also elongated the bolt holes of the pump and used a ratchet strap with the ski upside down attached to the bow eye with all four pump bolts installed and loose ...

I have been using SBT cranks which I have purchased 3 from Jet Maniac and highly recommend them. The price is very low imo and the quality is good. I still am running 1 of them in a 61x and it has hundreds of trouble free hours in surf ,salt water wide open around buoys etc. I have abused this...

Im in Fort Mohave close to Group k I think. There is a decent standup community that rides real close to me on the river should be fun. I will truely miss the ocean though but time to move on .

Sorry Joe I just moved out of my house in Long Beach today and am now officially a resident of Arizona. Really gonna miss riding out there and hope you can make it great again.

Kommander or Prowatercraft will sell you one for a small fee I bet. haha I have my fingers crossed for a new Superjet to come with one in a couple years.

I put gasket sealer (1211) on the side of the gasket that touches the plastic reed cage as the V3 tends to leak I have heard. Not sure if this is recommended by a Builder but would be interesting to here opinions on this.

The exchange rate is legit. The ( going rate) is not cheap If you do not want want to pay for the latest technology then Don`t. The shipping was very prompt and I am happy with the performance of this ignition and see no need to change curves. Getting something shipped from abroad is never...

I think I’m going to ride Saturday if it’s not pouring rain we get there alittle after 8am

Why not just get an SBT crank from JM.. Use oem seals, new gaskets , freshen up top end assemble correctly and Done!! But if you want to spend more money and complicate things then go that route. :p

The Oside crew will be there in the morning. Double overhead and very light wind predicted wish i could play hooky from work and go probably be the biggest and most epic day in some time. Really kinda scary when its that big but getting on it early is THE only way to go. The Freak bounces to...

@hpsperformance HPS sells 4 ply turbo silicone hose aluminum tubing whatever you may need.

DYI Total loss or MSD TL upgrade box 270USD?

speedysprocket .

Really like this one.^^ If its clicking and battery is good the ground is the culprit all those cranking amps gotta get back to the battery somehow

Great Times down in Mexico for sure the old days truly a Freeride!! Wild Crazy ANYTHING go`s drunken times well those days are gone. Its just not safe to camp on the beach in Mexico imo but Estero Beach in Ensanada is really a perfect jetski spot has a flatwater place to set up buoys and a surf...

Very Cool!!! Those arn`t cheapo turd motors either . What type of intake ,carb,reeds do you prefer ? how about baseline jetting , isnt the jetting similar on the exact same carb between 2 of the same size motors.