Search results

650 and 701 Exhaust Hose are different diameters. Take some measurements. Can "stove-pipe" one together with one 90 Silicone Elbow. two 45 Elbows, two DIY Aluminum Tubing Couplers cut to length plus six Hose Clamps... Or might can buy a cheap used Yamaha Exhaust Hose or two with the right...

Yes

Modified Kawasaki SXR 1500 Hood in Excellent Condition for a great price. Hood has been modified for increased Air Flow with cut-outs and Frog Skinz. Shipping is EXTRA and 100% on the Buyer. Have no idea what the Shipping and Packaging would cost. Buyer makes all the Shipping arrangements...

https://www.aircraftspruce.com/catalog/appages/lp1200tube.php

Have a Brand New one for $75 shipped. Comes with Grommet Kit.

Beware of Scammers!

Beware of Fake Clone Account!

The Stock Pipe is a "Dry Pipe", which means it is double-walled or has a water-jacket. The Big Rubber Boot makes up the Outer Wall of the Head Pipe. So the big Rubber Boot covering the Head Pipe, between the Exhaust Manifold and the Chamber, carries Cooling Water under pressure. So the...

CALCULATING FLYWHEEL MAGNET STRENGTH This is a Crude Ballpark attempt at calculating the Flywheel Magnet Strength to use as a reference tool to distinguish a Good Flywheel from a Bad Flywheel. Then the Actual Magnet Strength can be measured with a Gauss Meter and compared to the Nominal...

There's a used purpose-built Jetski Tank for $750 in Dallas. Comes with a lifting Boom. https://dallas.craigslist.org/sdf/boa/d/mabank-jetski-test-tank-seadoo/7617177463.html Also seen where a Boat Shop had made a small rectangular concrete pool with a boat trailer ramp. Deep (2ft+) enough to...

Here's another way to check Flywheel Magnets: "You can use a multimeter to measure the resistance between each pair of adjacent poles on the magnet. If there’s a significant difference between measurements, it might suggest that some magnets are weaker than others." So all Flywheel Magnet...

Seen where Pam Coffman wrote that the Rocket Pipe was NOT made for the 750 SXi. If there is no Waterbox, you will have a hard time trying to dial in the Carbs. 2 Strokes need some Exhaust Back Pressure. You didn't say if the Keihin Fuel Pump itself was rebuilt... The Jetting and Pop-Off you...

Both Cylinder Compression Readings? Engine air-leak tested? Good Spark? Crankcase Drain removed and blocked? 650 or 750 Coffman Exhaust? Coffman Sizzler, Signature or Lightning? Stock OEM Airbox or Aftermarket Flame Arrestors? Original Waterbox, A/M Waterbox or No Waterbox? Keihin Carb Fuel...

Haven't seen Duckbills come off. Had them on a 62 mph 951 SXR race ski and stayed put. But only really work when Ski is in motion. Will drain a little Water when on the Trailer and Stand. So far so good on the Square Nose. But I'm only chasing Buoys. The Versiplugs drain more Water and the Ski...

https://www.atlanticjetsports.com/products/duckbill-drain-system-universal-pwc-jet-boat?_pos=2&_sid=f2e25745f&_ss=r

The Fiberglass Layers (Top and Bottom Hull) around the Aft Eye tend to separate with time. I noticed this on mine before I Turfed, so I applied some Epoxy "Peanut Butter" around the Hole Inner Wall to seal the gaps, let it cure, sanded it smooth. Then turfed. But generally, the Square Nose...

@Clous22. Apparently you have every Part that everyone needs :D You're amazing! :confused:

If the Exhaust Hose melted, the Pistons probably melted too... Do a Compression check and report back. You need to figure out why the Engine ran so hot in the first place.

Family’s and friends only. :p