Search results

Added a Home depot one way valve. I hope this works! Refoamed and deciding where to put the foot straps.. And now for my first time fiber glassing. I did 3 layers of 17 oz cloth from US Composites. I also glassed in plates for the foot straps

Here's my first shot at a ski build up. I decided what better way to learn to fiberglass then to cut a ski up!! Especially a 550 (what do I have to lose?). After seeing a few flatdeck's builds on the X, I pulled out the sawzall and cut away. All the wet foam removed !

Id be in for a ride...

Pictures from Hothole Here is what I have from Sunday at Hothole. This was my first event that I made it to. I had a great time watching and riding. Hopefully Ill get to more events next year.

Thats what I want to hear!! Any one know where the best launch to use is?

I'm planning on going to Hothole on Sunday +1. Assuming its still going on there. I haven't heard of many people going. What is the best ramp to use to get there? I've never rode down in that area.

I have been watching this auction from the start. Some people must not have a clue how to use google and search for the manufactures website and see what they should pay!! I was watching a tail light that I needed for my RZ350 on ebay go up to $120. When there was 10 mins. left I called a place...

Is the pole cracked anywhere at the bottom? Was it epoxied in? Cant you just put it back in, bolt it and epoxy it and call it good if you don't want to go shorter?? Mine ripped out like that, it was never epoxied in from the previous owner. I had to shorten mine a little more because the cut he...

Ok ill give the plug caps a try. They were the stock caps, so I took them off and put on some NGK caps now. Hopefully I get to the lake this weekend to see if it worked. I have a dyna coil around that I could try swapping in there if I have to. Where the dyna coils used in TL ignitions? Super...

I haven't rebuilt the carb with all new parts. I have the bn44 and I also have a bn38. I went through both carbs and used the best looking gaskets and diaphragms out of the two. Other then that I haven't replaced any parts. I cleaned up the needle seat, and ran wire through all the openings and...

I have my gas mixed at 40:1. The ski and engine are both an 86. I only have about 30 mins. run time on the engine so it might be a little to early to read piston wash. I'm still leaning towards it being something wrong with the carb, but I cant find anything wrong with it. Any other...

SD Could you post some pics of the carb, intake grate and ride plate here on the X. I was unable to view the pics on PWCtoday for some reason. Also here are a couple pictures of the plugs. Again performance was almost no difference from half throttle to full throttle.

Ill check the plugs tonight and let you know what I find. When I first pulled them they were not white, so I wasn’t worried about it running that lean. It does just barely get up on plane, and throttle response is very sluggish. Compression is at 130 in both holes. I tried tuning with the...