Search results

so i performed the leakdown test and after 6 minutes there was still roughly 2 psi of pressure in there so makes me think the leak cant be that bad i sprayed snoop a product designed to test for leaks and found a verysmall one on the reeds but not major so i tighted the intake down more one...

also is there a certain gasket between the reeds and intake manifold i bought my reeds used and they did not come with a gasket so i am currently using a gasket the i got extra with my reed spacers i would put the stock metal one back in but the inside diameter of the gasket is much smaller than...

if anyone could help me with the building of this leakdown tester it would be awesome also with the carbs removed in order to do the test how can i tell if the leak is between the carbs and the intake manifold?

ya that would be awsome and if you have a list of the stuff i could buy cuz i would rather just go to the hardware store and purchase the parts than have to wait to get them shipped as summer is a very short season up here in canada. Thanks alot

So do u mean where the jugs go onto the crank case and where can i buy a kit for doing a leakdown test and the crankseals u mean like the seals on the end of the crankshaft

So i know i habe an airleak caused by the uncontrolable revving of my motor if i have 190 psi in both cylinders it means that the head cant be leakin righ and it has to be on the intake side of things i did notice when i pumped the primer lots fuel came out of the end of the shaft for the...

i got the two way switch from blowsion works great

jrslim what kinda paint is that on your pipe and how has it held up after some wear and tear still the same colour or has it changed from the heat it looks sick!!

blowsion sells some sick carbon fiber bumpers!

the pic that tzane posted is what your looking for

at a lake around here we got some skier's that figure they own the lake and can set up there slalom course wherever they want then they own that part of the lake and noone can ride in that whole section and good luck tryin to set up buoys for you to rip on

haha i dont even know how to put an emoticon in

i guess i should of put one of these inhttp://www.x-h2o.com/images/icons/icon12.gif

keep the gloves up suzi holy!!

what a doucher haha

i would just use the jets that came with the pipe thats all i use and i have a similar set up and i like my pop off pressure around 21 psi i have a wetpipe,jsu girdled head 185 comp, tbm reed spacers,v force 3 reeds, r&d manifold, novi 48's and the jets that came with the pipe work great im not...

ya ross its about the most useful thread i started haha!

k well i have the carbs tuned pretty good but the high speed screws are out 2 1/2 turns and the lows 1 1/2 turns so that means that on the highs i should go to the bigger size jet right maybe even two sizes and on the lows should i change or do u think i am good there

will my jets outta my stock carbs fit in my new novi 48's since they are both just a mikuni body anyway.

Ya there are not too many out there haha