Search results

Just tried to get pop off guage, he ran out, but remembered me when new ones arrived i appreciate that stuff. Good responsive seller. Will buy from him again

Just had a great experience w EMACHINES. bought a pipe and head which were in exceptional condition. packaged carefully w all the mounting hardware, and recieved rather quickly. Thank you Steve C

http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&Ntk=all&Jnar=0&Ne=1%2B2%2B3%2B13%2B1147708&searchTerm=Msd+4253

So far jegs. At 239 free shipping

Make sure u mix the epoxy very well. Stir and stir some more Still tacky now? A few days later? Does take more than 6 hours depending on the hardener they gave u. If you are layering on the inside, flip the machine over, the wetted material will form in better to you contours rather than...

Have all of the above, except porting

Does this make much of a difference? Worth doing ? Seems like an inexpensive mod

great answer. Aha now i Understand thank you

Not sure what resin u r using, make sure it's new. If its polyester, Older resins can. Do that.When that happens I usually run up to the store and grab a new batch. (Older resins turn dark, instead of golden tint). mix a hot coat up (more hardener, but don't over do it). use a cc dispenser for...

Mold from foam plugs i made w that silly contraption. Under vacuum finished weight is 22 pounds after reinforce and paint Now lets see some updates on your build

I dont mean to hijack your thread I make molds and parts as i said all the time for myself outa carbon

I use ss safety wire from lowes Also stole the switch out of a barbie dream mobile before i tossed it and zip tied it to the handle so i can turn it of and on without jumping back and forth to the charger. took half hour, worth every minute. also put a fuse on mine and wrapped the wood w duct...

very creative work. Nice

Just be careful the wire gets pretty hot

Quick trick for shaping foam. Take 2 1"x1" pine 16" long bolt them together at one end. Make it 90 degrees. At the far end of each piece I put 2 small screws, wrap ss safety wire from one side to the other around each screw and run each end back to the part where the 2 are joined. I use blue...