Search results

ok so I have a 09 superjet that I just lost my first rope end on. I'm going to fix it quick bu not sure of I want to do any porting or just keep it stock with a fresh top end , I now have a young child and and have less and less time to ride so I want to ride not wrench . I'm running a b pipe...

What size domes so I can run pump gas Hi guys I picked up a 96 blaster this week and it has 200 in the front cylinder and 190 in the back cylinder. It's has a riva head with 35cc domes and I was told I should run half pump half race gas. What size domes would I need to be able to run just...

So I was out on the ski and it ran great just the other day with no sings of a problem. Today I was checking the psi on another ski so I checked the sj and I had 185 in the front and 110 in the back cylinder. I have a b pipe and a ada head and it's on the original top end on an 09 so I guess...

i picked up a real clean 96 b1 today. The guy I bought it from said I should use a mix of race and 93 octane because the cylinders have 190 and 193 octane. At what compression do you need to run race gas. Dont want to blow the motor

hi guys I have a 09 sj that I'm having a corrosion and rust problem with its only in drag water never sank and I spray it down with wd40 after I ride. It has very low hrs I just don't understand my last Superjet I beat the poop out of it and rode in the salt and sank it once or twice and never...

hi I'm going to be running a Ada head msd enhancer for ripping around the lake am I better with a riva red or a b pipe

DezKnotzJoined:Apr 29, 2008Messages:602Likes Received:Location:New JerseyI was out on my ski ripping around and all of a sudden I lost power and if I gave it gas it just vibrants a lot. I checked my plug wires and my compression is 185 in both cylinders. What could this be ? Reeds? Any help...

I was out on my ski ripping around and all of a sudden I lost power and if I gave it gas it just vibrants a lot. I checked my plug wires and my compression is 185 in both cylinders. What could this be ? Reeds? Any help would be appreciated

?

Got a couple of stand ups going a couple of stand ups a blaster and a xboo if your interested come on down

iok so i just got my sj tuned in good and now a new problem started today, if the fuel petcock is in the on possion and i have it at full throtle or close to it it runs out of gas boggs a little bit till it fills the line and its fine till i run out again. if i put it on res it runs fine and i...

best price on fuel lines and need a blaster start stop

ok picked up a sweet blaster for 500 buck just needs a start stop, but when i jump start it it runs ok for a good five seconds then it takes off like its pinned and i have to cover the carbs to kill it. could this be as simple as a carb clean or a hole in the fuel line ?

looking into v force 3 reeds any one have them and like them ??? do the reed spacers do any thing ?????

best price on an MSD enhancer?

ok 2009 sj bpipe ada head rest is stock just did the pipe and the jets that factory pipe say to use .ski runs great at first and if you where wide open, but if you where puting around at like half throttle or bropping the throttle and then go to punch it doesnt bog but its like load up on fuel...

does it really make that big of a difference the umi over stock is it worth the money

Was going to get a Deka. Or dynacell is their a model number or type ?

what should stock compression be on a stock head?

how do i run dual cooling on a blaster with a riva red pipe and stock head? do i just tap the pump and the stock head ?