Search results

Doesnt seem to work for me..anybody else?

I need to tack a mounting flange back on my pipe, my questions is can I do that while still on the motor/ in the ski without risking frying any of my electrical with the current?

I know there was a huge list of all the bolts in a superjet but I cant seem to find it :banghead: I need to know what size/threads the bolt that holds the pump to the hull is (4 bolts that thread into the pump cavity). 2006 superjet, thanks.

I got a cheap set of hand holds of ebay a while back but have no idea how to locate the cutouts to drop them in. They look exactly like the blowsion ones...anybody got old instructions? I dont want to just cut a hole where I think they should go and have them not sit right on the hood.

When the ski was stock there was no vibration (obviously) this winter I built it up a bit (ada head, dry pipe, enhancer, 14/18concord, wwc etc.) after riding it this spring it seems to have a mild driveline vibration on the mid range. When I yanked the motor I carefully removed each set of...

2006 Superjet: ADA girdled head (37cc) Factory Type 4 dry pipe MSD enhancer Choke delete (stock 38s) 14/18 Solas Concord WetWolf Cone Dual Cooling 2" one way valve w/ pump dump -3" pole -4.5" steering bracket blowsion pole spring Xmetal bars with Xmetal throttle, ODI grips 500...

I seem to have lost the screws for my nose piece while working on it this winter. Anybody know what size/pitch they are or if they are just self tapping?

Just want to get some opinions before I turf over these things. This is how my install has gone thus far. Cut and fitted the holds and the hull best I could, roughed up all surfaces and cleaned them all. Mixed up some epoxy resin and a bit of filler and bonded the holds to the hull (there was...

ADA girdled head, pipe, Enhancer... I think stock is B7HS or something...should I use BR7ES or B7ES or....?

Last one I promise... I am using 2"pvc and a one way from Menards...when I glue the one way to the PVC what should I use? I was planning on just using epoxy resin and just sand and clean all connection points. I also have to glue a PVC 90* onto the tube. I have heard some people say epoxy...

What is everybody using for cooling lines? I see some skis that have some clear reinforced stuff that looks like its from Menards, I would like to find some clear stuff so what do I need and where do I get it?

I know its been discussed before but there is not one straight answer in any previous discussion. I am currently running a stock 62t 701 next year I wanted to have it ported to wake it up, but then I saw some cheap 760 jugs on ebay and decided to pick em up the water jacket was cracked but my...

I am just putting in my enhancer and had a couple questions, in the instructions I got from MSD it says do not connect the pink and white/red wires on the enhancer but in the diagram it shows them connected, what gives? And second is on the rev limiter dial, where should I set it (I am running...

I am working on putting in my Menards 1 way valve and need help figuring out what materials I need to bond it to the hull and seal it all up but I am unfamiliar with anything involving epoxy, resin or fiberglass. If somebody could give me specifics on what I need and where to get it that would...

Got a line on some covers for a good price and going to be setting up a group buy here quick just wondering if a square cover will fit a round nose?

Do yourself a favor and before you even put it in the water, seal it up good! I am in the process of building up my '06 (which has maybe 3-4 months of ride time on it from this summer) and pulled the little stickers that cover the factory foam holes, water poured out. Luckily I am already in...

So I have a new ADA girdled head and am going to be running a Type 4 pipe with an ADA exhaust bracket but I do not understand how it all goes together. I dont see how the bracket fits on the head, it doesnt seem to lign up with the bolts I thought it would. Anybody got some pics of this setup or...

Anybody try one of these for a stand? It says 500# capacity..and much cheaper than a normal scissor stand but not sure if it would hold, maybe if you added a couple strap supports like the aluminum ones... http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=38779

A few months ago I bought a blowsion spring off of a member on here and finally got around to installing it only to find that it doesnt do ********!! I think its installed correctly (long arm into pole bracket, short into pole) and looks right but it doesnt hold my pole off the hood, it barely...

Has anybody seen or tried the Factory pipe Type4 dry modifications suggested by Jetskisolutions? They have a kit with step-by-step instructions on how to remove the "barb" on the headpipe to make the more reliable without blowing couplers...anybody try it...