Search results

I got matt_e's old rn handpole off his square with bracket and all and I am trying to install on my square and have a question.... How does one get the front of the hood to stay down, the old bracket has the little hooks that the hood slides under but the new one there is nothing... Any ideas?

Nothin great I have only been riding serioulsy this summer, I bought it last year and building it up slowly and got to ride alot this summer and a couple guys showed me how to sub. First is a video then it goes to pics, when i first started this year second is all video of yesterday when i...

750sx1992 has a 90 something kawi 750 and is having a hard time with the carb. I have some extra sbn 44's that I was gonna offer him but we were talking and not sure if they would fit... I thought it would (heard lots of guys use them on the later model 550s to get away from the round body...

I have a stock 61x motor dunno what jets are inside the carb right now but i installed a b pipe and forgot to order the jets so I ordered them long story short now it will be next week before they get here, Can I open the high and low up and run it for the weekend without blowing it up? have...

First of all there is no room where the head pipe meets the b pipe, THAT SUCKS, I grinded some of the hull where those spots that stuck out higher down flush and it helped but not much. 61x motor The Problem My head has 3 places for water lines, See pic, 2 are normal size ones a piss ant...

So I have broke two solas tools in a week span trying to remove the same impeller, Used torch both times, should I just cut the dam thing off? Sucks having a brand new prop on the shelf and look at this ugly thing in the pump... Its on a superjet

I got a 4/17 yes it clearly stamped 4/17 but with my google searches, and board searches I cant find anything about a 4/17...there is alot about 14/17 but nothin about 4/17's.....any thoughts..

Friggin fals3illiusion heckled me about his till I couldnt take it so I called and ordered one!!! 675 plus shipping

I had a bone stock ski that I recently honed and re-ringed and put a high compression head on it (sitting at 185 now) then i got the urge to get a pipe, found a brand new factory half pipe for the piston port motor. Also found a sub plate? and a set of 0 degree bars for the little beasty. Also...

It pulls me out of the water fine but runs like a dog on the top end, feels like I have lost 1000-1500 rpm. It has ran perfect since the rebuild (about 5-6 tanks of gas) but the last trip out I went through a lenghthy no wake 1-2 miles with min throttle acceleration just short burst enough to...

I am lookin at a crazy 9 ported pro tec cylinder and wondering if anyone knows anything about them, are they good for low end or just mid and top ( I got a stock setup right now and mostly want bottom end) If I bought it I would wait till I find a b pipe then do the switch, any help would be...

I am going down tomorrow evening and want to ride sunday near pakery channel?? I dunno thats just were the parents are crashing. they are staying in tents I am staying in motel avalanche Oh yeah if you like to fish were gonna do that tomorrow night to pass the time, I will be there about 8pm

Does it always hurt after a weekend of riding, I feel like I have been through a meat grinder after every weekend, I know if you don't hurt you not trying hard enough but does it ever subside? (standups of course)

I recently finished alot of stuff on the ski (paint inside and out foot holds rebuild) Long story short I found an extra hose (think it was twist tied up when I bought the ski) I laid it in the bottom thinking it was a siphon and had a one way inside the hose somewhere... ( I also a bildge on a...

about the 4th time I have ridden the super jet after(last summer was cut short do to needing a rebuild) This is probably about the tenth weekend I have been on a standup, will never go back to a couch. I was riding at medina lake near San Antonio, anyone wanna ride??? will have some videos to...

I bought this ski from a german guy last year and it has this weird brand pipe on, i have googled it and searched boards came up with natta. ever heard of it? has PSI stamped on it, is a two piece pipe, exhaust manifold and the pipe itself... Its a superjet, had the 650 when i bought it has...

I looked up part numbers and they seem different from the 650s to the 701 yet they work anyway.. and since they work with the 701 in supers they should be the same for blasters right? I found one thats a 62E-85570-00 but mine is supposedly a 61l-85570-00 is there nay difference, possibly the length?

I have what seems a really agressive intake grate on the super right now (two scoop R&D) sticks way out. I have only ridden the ski a few times before I blew it up last year and got stuck with the js 550 with a open grate. What the riding difference between this one and a open one, just...

Just finished the install, I dont know how others compar but these were kinda tuff. I did some alterations to there design to allow it to fit better like busswhack the top lip and some of the rear lip. never done it bfore so I just went to town on the hull, loos like it came out alright...

So I bought a 61x dropped it in there and have an extra port on top I guess for duel cooling, I rebuilt the motor over the winter cuz it was tired and now want to go a different setup. I was thinking of putting a restristor in the second port, near the flywheel side and run it to a pisser (stock...