im using the PDCIS-01T. email borat telling him what your doing and he will supply it with the right plug then all you will need to do is hook up a power feed to it. The rest will plug straight into your 760 front cover. I can then give you the right static angle and your done. I have set up a...
Thanks for the heads up guys,
The breather hole is down because it allows any water that does get in there from a sinking to drain out as well if it rubs up against your exhaust hose it can block the hole if its on the side. These are 6061 marine grade so they will still look like this well...
Thanks for the heads up.
I actually thought about building a Yamaha switch but didn't because of the unit never giving issues. but its worth looking at
There is only one pickup and two lumps so you can only run it single channel unless you add another pickup. But the reality is there is nothing to gain by changing coils. the spark energy is mainly dictated by the cdi and not the coil
Yes please do. i have no issue with you, its x2stroker that dragged me into this one, this is why i wrote what i did previously.
Im pretty much done in here with this, i have no desire to argue about it anymore unless x2stroker starts me again.
The inductive pickup as in the 760 system does not require you to put 12 volts down to it unlike the hall effect senor. I have not pulled them apart and gone through the circuit on the bench and I have no need to. I know anytime you're sending 12 volts around a jet-ski you are asking for green...
Ok well im at home now and its much easier to type on my lap top.
To answer you're analogy
No one said to eric malone that he had no idea about hulls and he should stick to electric bikes and then meanwhile went and used the very same hull after eric told him where to buy them.
Sinisterjosh i...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.