Search results

hey this is travis from eugene

Anything you can unbolt. Always nice to have little things.

If you seeking low budget you can replicate/build your own kit for super cheap. Buddy did this swap in a weekend. Full throttle has custom lowered mounts made by rhaas but you can use stock mounts that are 3/4 lower and get them to fit. Get some high-grade aluminum to make the plates and play...

No feedback on their dp-12 but I just picked up their sko-12. Haven't had it out yet but the quality is top notch.

Should not have any issues with 170 on pump gas.

Yes its pricey but worth it. Adjustments are easier with the HD cable.

Changed out the leaky tygon fuel lines with some good stuff from jetmaniac along with the black Y from above and a 60 jet seemed to do the trick! Little blaster runs good now. Thanks for all the help. I need to pick up some carbon tech reeds before it eats the metal stockers.

No restricter in the return line. Should I stuff a 120 jet in the return line or how do you judge the size to use? Both returns from the carbs are T'd to a single line them attached to top of tank.

Primer line is t'd to both carbs but plugged/capped with a screw in the line being closest to front carb. I'll see about moving that around or just complete the lines so it works. Fuel lines are hooked up to ins and both returns are t'd to single return to tank. Doubled check those to make...

Well spoke too soon. Anyone have any advice/ideas as to why the front cylinder won't fatten up? Blaster with 61x dual 38's each has their own fuel pump and direct line to fuel tank. I'm thinking there is an air leak some place causing the front cylinder to go lean. I have replaced about every...

Jets worked out good guys thanks! Held off on changing the pop off springs until I get a tester but throttle was crisp with the springs in it.

Or these http://www.chainreactioncycles.com/us/en/da-bomb-tactic-740-handlebar/rp-prod69870

I'll take two where do I send payment?