Search results

yes, it is stainless. the local ace is very cool.

alright which is it 40 long or 45 long. i found case bolts and i found m10 x 1.25 40 and 50 at ace hardware

i thought the exhaust bolts were m8? or do you mean from a stock exhaust pipe. i bet i have those, i know i got to have three case bolts charlie is your avatar inhaling or is your ski shotgunning someone

thanks guys you saved me the headache of driving around looking for them. i will just order them.

cool, anybody find them at ace hardware. got one of those a block away

great matt, that is a good start :) i thought they were standard not metric ?

i need the complete size of bpipe head pipe bolts yami: diameter, thread and length. sorry i am sure it is already posted here somewhere. lee

i am odd sized 5'9 160 no legs. i fill out a large t-shirt. i had to order mine from riva.

i wear a large/xl in the new jetpilot side entry race vest and wear a medium in the switch vest.

reed is a big p***** he can't hang with the kid. he only wins if the great riders are not there. same thing before james came in, ricky dominatd him. reed can ride really really well but he never goes for it, he just gives up everythime james passes him. james had to hit the brakes atleast...

it is the same pipe with a 62t manifold

sorry it is pit bike on steroids. 17" front wheel and 14 rear wheel. bike is about the size of a yz 85.

where is this track? they let us oldtimers on super mini's ride there. i got 17/14 160 4 banger that has 9" front travel and 11" rear travel. would i be out gunned?

we ran one this weekend w/ a b pipe and 12/17 scat swirl, on a buoy course it never hit the rev limiter. b pipes only rev so much

because it was for a scat pump, when it was made it was tough to get one from yamaha not to mention it is cheaper to have one made. this one will work in a scat pump as well the rear has been machined off. works in a stock pump too. long story but i asking what i paid for it. 200 shipped.

i got an 08 shaft if you need one, custom made by scat trak. less than 5 hours use :)

i highly doubt it, most people are all talk. you will end up owning 23 of these forever :) besides most people don't need a b2 cable. you only need it when you build big hp motors. a simple trick is to put a steel sleeve over the the rear of the cable, the cable bends on the outer...

mine are not working for pm notifications.

you need the 1997 b2 cable. it is 2mm thicker. may need to get a bigger thru hull cable piece. the bigger problem is the steering cable holder under the hood. you might be able to make the stock bracket work with some dremel help. i use a piece from engine trix that is no longer made

it;s just a pic for "fx1" his email ain't workin,