Search results

,,,,,,

,,,,,,,

Lol l got it

,,,,,,,,

Here's a 700cc pipe you can probably see its alot different

Most important about the 700 3 piece pipe is it just barely fits so you have the correct one and only half stainlessreed pipe that l think is the only pipe even near or has more power than factory pipe

Factory piped 650 170psi light flywheel 70-80hp Pjs had a 700cc cylinder made for the 650 bottom end and pipe to match that could produce like 130hp the pipe is much different than you have,also pulls like a freight train on a 650

You shoulda put In a stock sxi pro 750 with a custom tank for clearance for the factory limited pipe, Your gonna be lucky to be at 58hp on the 701 ,650 is 52 Sxi limited pipe 95-100hp

Its hard for me to tell which pipe your using but,just making a pipe with a math volume equation isnt going to work period and a stock pipe aint gonna be much better than the 650 and your only gonna have 15-25 minute run times, good welding skills

You shoulda left the stock waterbox in these is hard to beat,if you wanted it louder you coulda removed a baffle to 3 for more flow too I hope it runs good for you ,because you just sold a killer setup that was a sudco 42mm carb all you needed was the 17hp factory pipe and some compression and...

Delete

The pole looks like it looks good, you coulda made the stock pole feather light with pole spring helper , or they use the blowsion 750 spring but trimming is required. First off ,the 650 with the garbage pjs stock pipe was the problem, when you scrap 15 minute run times , make sure you have...

I would try leaning the topend before changing the springs or jets

Lets see your plugs now

That looks like what you need , his pipes a little different ,l cant see anything from were im at You,'ll like your pipe when you get the stock box hooked up it wont be annoying and abnoxious

Whats the water hoses routing on my ski?

Hopefully it runs like it looks , it has a decant sized looking chamber

As long as its a free flow it shouldnt really hurt performance ,rear exhaust is a poop load of tubing compared to side exhaust amd theres no powerloss that im aware of

The stock water box will work you'll have to strap it down like a 650sx ie glass some hooks in fiqure out what bands will work get some of that matting rubber maybe you have a square to sit the water box on and may have to get special hoses from? Order them from somewhere as long as its a clear...