Search results

So I just picked up some replacement bearings for my mid-shaft and pump and it got me thinking that we need to compile some part #s so you don't physically need to have the bearing/seal in hand to order from a supplier. So, if you have a rebuild kit there or anything torn apart, take a look at...

Looking at new pump bearings and seals. This thing has been apart for almost 3 years, so I'm not sure where all the parts may have wondered off to. I was using Riva's site to find what I need. Looking here, and I'm not too clear on a couple items. I need 2-#20s, and a #22, but what is #21. Is...

Title says it all. Mine broke off when I dropped it. Just wondering if it needs to have a nipple like what was there, or plug it, or maybe a zerk fitting? I noticed there was some grease inside it. Thanks

Found this bilge switch on an Australian site and wondered if these were available in the US?

So I'm reshaping my SN and going flat deck. I've done some glassing before, but never enough to know strength compared to thickness. I've poured foam over my SN nose and reshaped. I also cut my hood down and foamed/reshaped as well. I'll obviously need to glass my deck too. My question is...

Ok, so here's the deal. I've got a 61x bottom end and 6m6 cylinders. It was like that when I bought the 92 SN and I figured that someone had some thing special on there at some point, swapped it back to sell it. The hull had tons of stickers and was clearanced for a dry pipe. I opened up the...

Can someone measure between the ears of their RN pole bracket please? I'm building a custom bracket for my SN and would like to build it like a RN bracket, that way I know it will fit about any RN pole out there. I currently have an AC pole, but custom bushings to fit my SN bracket...

Just found out my 92 mid-shaft will not fit my 'new' 94 hull. So, what year range do I need a donor from? Will RN shafts fit? Also, does anyone know of any other things they changed from 92-94 that I might run into swapping everything over (I mean everything). Thanks, Steve

Some of the pictures I've seen, it looks like a 62T engine, however, the bore is 83mm and stroke is 71mm. It is it's own creature or what? Steve

Got some #.0 front sponsons and was doing some mock up. It got me thinking (ya, that's dangerous); How does the positioning effect ride? A bit fore or aft would change where the water hit them. Mounting them a little low would leave more of a "ridge" right there where they meet the corner...

94 SN, been doing some 'custom' work on it. I did some mock up tonight and didn't realize my pole (AC) takes a dive at the end so it left a pretty good difference in height between the pole and the front. I do a bit of hood tricks and I'm now thinking that the new 'pocket' created will be a nice...

Got it at a local hardware store. My HD didn't have anything like it but a crappy flap version that wouldn't stay closed on it's own. This has a soft spring holding it closed. I can make it open by just shaking it or I drop if from 2" into the palm of my hand and it opens and closes. I put...

I am working on the back of my ski, doing a -2, and the exhaust won't be exiting from the rear anymore. I will either dump it out the side near the back or I was thinking of maybe dumping it into the pump well. I know it really won't pose a problem dumping into the pump well, but will a 2" hole...

Well, I recently found myself unemployed and there is a good chance that my step-dad will be unemployed for the summer. I can weld and fabricate, he is a professional welder at a boat shop (not many orders coming in because of the market) and between us, we have all the tools to do a lot of...

So I have a SN completely stripped out getting ready for a mild build with reinforcements, slutty hood mod, foot holds, etc. I drilled two holes in the rear to see if the foam was soaked, and it's been dripping for days now. Looks like I'll add re-foaming to that list......but that got me...

So I bought the ski in August, now I have it in for a winter build. Removed the turf and here's what I found: As soon as I saw it, I knew I was in for a suprise. Someone had an 1/8" aluminum plate bent to fit the tray, then it was 5200'ed into place and rivited to the sides. I had to cut one...

Shopping. Just wondering who makes the best angled finger throttles? I know some venders rebadge others and sell as their own. Who sells what? Steve

I have horrible vision. Going without contacts is not an option. I've tried sun glasses, even foam lined ones. Even with straps, they always come off. I don't wear a helmet, but I may start wearing one. If so, I'll go with helmet goggles. Until then does anyone have any suggestions or special...

Title says it all. Looking for pics of installed Total Loss systems. Steve P.S. Hey SuperJett, anyway we can get the words MSD and TL included in the searchable words? Everyone abr. as MSD TL which is not searchable.

So everyone talks about this 'b' pipe, but what is it? I know it's Factory Pipe, but it's not on their site. They only show other models. Is this a modified version of one of those, or something completely different? Where do I get one? What kind of power will I notice? Help a noob out...