Search results

We added them to our 08 SJ and love them.

Looks great!

1994, I bought a Raider when they first came out.

A foreign object in the cooling system that is small enough to move around, but big enough to prevent it from getting expelled can cause what your describing. It can move around when under pressure, get stuck and restrict flow, then it can fall back or move to a different place when the water...

I trimmed the stock plastic on ours with RRP steering and recovered, works great.

My 16 Comp hull is open, no tube. That's why I needed to make a support out of epoxy to support the front of the valve. FYI, mine was special order with foam Comps don't normaly have foam under tray. The Thrust valve doesn't fit in the tunnel it would hit the exhaust tube. That scupper (in...

Same engine we have in our XFS, runs great, very dependable. Dasa says the 1000 is the best combo for power and dependability. Don't use oil with caster oil in it. Before I purchased the engine I had a lot of questions, here's a response from Dasa on how many hours before rebuilding things...

PITA job, mine was in there solid. Go slow and take your time, you will have a little of the messed up part show. I used sealer around the new valve to cover it up. Depending on the hull you might need to build a front support for the valve inside the hull with epoxy. Sorry some of the pics...

Does your bulkhead seal the engine compartment, some don't, I believe some skis have a bulkhead that stops short of connecting to the bottom of the hull? Water can get in a number of places. Fill hull with some water and see if anything leaks. Leave it on the trailer and back in it in the...

Like the title says, I added an RRP steering system w 50mm fat bars to my stock SJ handle pole. The stock chinpad could be made to fit with a lot of modification and recovering, but I'm wondering if anyone has the same setup and what chinpad you use?

As I said in the original post it's for water. Thanks 37 that was the answer I needed.